iSimple GateWay ISIM71 PXAMG
I recently upgraded from the gen2 jbl unit to the gen2.5 jbl. With the gen2 I had been using the Peripheral PXDP iPod interface unit v.1.4.1. After I swapped units I found the PXDP no longer worked. The PXDP seemed incompatible with the gen2.5 radio.
Today I picked up the iSimple PXAMG GateWay for imports: ISIM71. The PXAMG is an updated version of the PXDP and was a direct plug and play interface. Installation of the two units were exactly the same plus the PXAMG also included wires for RCA and headphone jack inputs. After installation the unit started right up and was recognized by the gen2.5 jbl radio.
Just wanted to post up that the older PXDP was (in my case) not compatible with the gen2.5 '07+ JBL radio and that the ISIM71-PXAMG was compatible.
Today I picked up the iSimple PXAMG GateWay for imports: ISIM71. The PXAMG is an updated version of the PXDP and was a direct plug and play interface. Installation of the two units were exactly the same plus the PXAMG also included wires for RCA and headphone jack inputs. After installation the unit started right up and was recognized by the gen2.5 jbl radio.
Just wanted to post up that the older PXDP was (in my case) not compatible with the gen2.5 '07+ JBL radio and that the ISIM71-PXAMG was compatible.
-
GzNutz - SolaraGuy Semi-Pro Racer
- Posts: 2354
- Joined: Mon Oct 22, 2007 7:36 pm
- Location: Land of Beer