[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - 2007 LED Taillight Conversion
Page 2 of 4

PostPosted: Sat Sep 09, 2006 12:36 pm
by Jack Soulfire
How much do the '07 taillights run for a set?

PostPosted: Sat Sep 09, 2006 12:43 pm
by cklinh
Approximately $200.

PostPosted: Sat Sep 09, 2006 1:48 pm
by kingkakyle
someone help me!!! lol
i have a quick question. if i just plug in the new taillights....will the brake function still work without damaging anything

PostPosted: Sat Sep 09, 2006 2:45 pm
by ---CAMRAZY---
kingkakyle wrote:someone help me!!! lol
i have a quick question. if i just plug in the new taillights....will the brake function still work without damaging anything


YES they will work and you will have no reverse.

PostPosted: Tue Sep 12, 2006 2:17 pm
by WSkids97
Here's a good story. After refusing to buy resistors online I finally drove down to Fry's electronics and of course they didn't have anything to handle 50 watts, but they did have 25 watt resistors. So I brought out the old trusty treo and did the math. After trying several combinations (thank you three years of electronics, cause they were out of stock on majority of them) I was able to pick up two 8.2 ohm and two 30 ohm resistors. For 6.46 after I picked them up and a Rockstar energy drink. Installed them and now I'm not doing the robot to techno at every turn because of my blinker.

For anyone who would rather spend 2 bux for each light the formula is this for resistors running in parallel.

r1xr2
r1+r2 = rt

so...

30x8.2
30+8.2 = 6.44

When applying to wattage it is obviously strait forward because voltage remains the same while amperage is divided but that's all you need to save yourself some time from shipping and a few bux.

Another SG DIY

PostPosted: Tue Sep 12, 2006 2:33 pm
by ---CAMRAZY---
Cool, so I take it you got the lights on as well??? Post some pics...

PostPosted: Tue Sep 12, 2006 3:19 pm
by WSkids97
I've actually had them on over a week I just finally got around to stopping the stupid strobe light blinker... Here are some pics, sorry for the poor quality but my camera crapped out on me. Trusty treo wins again!

Image

Image

PostPosted: Tue Sep 12, 2006 3:52 pm
by cklinh
Hm... a bit off topic... but I think that's the first time I've seen the Gen 2's without the spoiler up close... very different...

PostPosted: Tue Sep 12, 2006 4:09 pm
by PXLpainter
Whoa hey - yeah - you're right! No spoiler! Weird... kinda Camry lookin' isn't it?

Anyway - I'm really diggin' the 07 lights - gonna have to do that some day myself. I still have my mirror LEDs to install first - just need the time now...

Cool to see one Gen 2 and one Gen 2.5 light on at the same time though - thanks for sahring! :)

PostPosted: Tue Sep 12, 2006 7:46 pm
by iinokturnolii
looks great!

PostPosted: Tue Sep 12, 2006 9:54 pm
by ---CAMRAZY---
See, aren't you guys happy I was the first to pioneer this for you? Its the best mod for the gen2, IMO, it sets it off.

PostPosted: Wed Sep 13, 2006 6:18 am
by MikeATL
Looking good guys.

Can someone please post a picture guide of this DIY?

PostPosted: Wed Sep 13, 2006 12:01 pm
by PXLpainter
CamrySE-soCALlara wrote:See, aren't you guys happy I was the first to pioneer this for you? Its the best mod for the gen2, IMO, it sets it off.

Indeed! Thanks Bro! :D

Reg is hookin' us up with the tails too:

http://www.solaraguy.org/viewtopic.php?t=28260

Just wishin' I had the extra $$ for it right now... :(

PostPosted: Wed Sep 13, 2006 12:22 pm
by gone
can't wait to install mine! looks real hot

PostPosted: Wed Sep 13, 2006 12:28 pm
by PXLpainter
Quick question - do the 07 lights come with an amber signal bulb in them that needs to be replaced with clear?

Just wondering...