[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - 3VZFE 3.0L INTO CAMRY WITH 2VZFE

SolaraGuy.com

Drive faster, live longer.
http://solaraguy.com/

3VZFE 3.0L INTO CAMRY WITH 2VZFE

http://solaraguy.com/viewtopic.php?f=4&t=1005

Page 1 of 1

3VZFE 3.0L INTO CAMRY WITH 2VZFE

PostPosted: Fri Sep 13, 2002 1:06 am
by bradyeh
I am looking at upgrading the engine i have in my VZV21 camry to the 3VZFE that is from the c1993 camry.

Is this possibe? a straight bolt in would be good? Any ideas?

Re: 3VZFE 3.0L INTO CAMRY WITH 2VZFE

PostPosted: Sat Sep 14, 2002 8:53 am
by Flipside909
bradyeh wrote:I am looking at upgrading the engine i have in my VZV21 camry to the 3VZFE that is from the c1993 camry.

Is this possibe? a straight bolt in would be good? Any ideas?


It's possible, but you have to make a lot of custom fabrication for the engine mounts, wiring harnesses and etc. They share the same block architecture but that's about it.
All times are UTC - 8 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/