[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Question about Brakes

SolaraGuy.com

Drive faster, live longer.
http://solaraguy.com/

Question about Brakes

http://solaraguy.com/viewtopic.php?f=4&t=43546

Page 1 of 1

Question about Brakes

PostPosted: Mon Feb 02, 2009 10:15 pm
by JamesT
So I replaced my pads and rotors as I was hearing a strange sound from the driver's side (my first thought was brake drag), and discovered that the outer driver's side pad was worn far more than the inner pad. Could this be due to the fact that the Midas that changed my pads a few years ago didn't install clip on the bottom of the outer pad? Or that the "V" shaped metal pin things weren't installed?


I'm really hoping I don't have to replace the caliper.

PostPosted: Mon Feb 02, 2009 11:16 pm
by Eye8Pussies
no, that shouldn't create such a big difference

chances are that either a slider is seized or operating not very well, or the caliper piston itself is seized or not working very well.

PostPosted: Tue Feb 03, 2009 10:10 am
by JamesT
Damn...

Well, I suppose it's a good thing I was planning on replacing the pins today.
All times are UTC - 8 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/