[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Introducing me and my Camry
Page 2 of 4

PostPosted: Sun Nov 22, 2009 8:28 pm
by t3chnique
Twin, might have one in the OC, if u know where that is.

PostPosted: Sun Nov 22, 2009 8:55 pm
by twinjetguy
Hell yeah I know where OC is. I live in Carlsbad, which is right next to Oceanside. As long as traffic isn't an issue, I can make it there in about 45 minutes. The next meet up that happens, I am there! :P

PostPosted: Sun Nov 22, 2009 10:44 pm
by t3chnique
Yeah, I'll make a thread soon enough. Be sure to check the SoCal section on toyotanation.

PostPosted: Sun Nov 22, 2009 11:14 pm
by 1gSE
the exterior DOES NOT match whats sitting in front of the firewalll :evilbat: ....keep it that way. Clean Camry! Welcome to the board

PostPosted: Sun Nov 22, 2009 11:25 pm
by WUTANGCLAN
Hey welcome man how long did the install take?

PostPosted: Mon Nov 23, 2009 1:18 am
by EEngineer
absolutely beautiful!!!

one suggestion, get the eriscol rotor brackets to fit the supra tt rotors.
u'd love it and it would look beautiful

here's what it looks like on my camry

Image

PostPosted: Mon Nov 23, 2009 11:48 am
by twinjetguy
Hey Guys,

Install took roughly 4 hours, but keep in mind the guy who installed it has done around 18 of these and really knew what he was doing. I bet he could have installed it blindfolded if he had to.

EEnginner,

I was following your build over on TN, way cool! Believe me, I want the big brakes. I JUST bought all my brakes and then found out about the big brake kit :( I was kinda bummed. I hate buying the same thing twice so I am just going to use these for now. They work pretty damn good for what they are.

1gse,

Thanks man! really liked your comment. That is exactly what I was shooting for. :evilbat:

PostPosted: Mon Nov 23, 2009 12:41 pm
by kenny6683
very clean!!!! what exhaust are you running?WELCOME!!

PostPosted: Mon Nov 23, 2009 3:29 pm
by WUTANGCLAN
Hey EEngineer, u running dual piston calipers or single?

PostPosted: Mon Nov 23, 2009 4:26 pm
by JMSinMaryland
If you ran the bodykit the same color as the lower half of your car it really would be one of a kind. I've never seen (since 1992) any 2 tone Camry with bodykit, it definitely is crying out for a drop first. When you do, look into the Solara springs/struts, for a bit more drop.

PostPosted: Mon Nov 23, 2009 7:31 pm
by LEE337
EEngineer wrote:one suggestion, get the eriscol rotor brackets to fit the supra tt rotors.
u'd love it and it would look beautiful


X2!!! :D They look and perform wonderfully!!! 8)

Image

PostPosted: Mon Nov 23, 2009 8:44 pm
by bbq bob
welcome

PostPosted: Tue Nov 24, 2009 5:24 pm
by EEngineer
WUTANGCLAN wrote:Hey EEngineer, u running dual piston calipers or single?


single piston camry V6 caliper

but apparently tony the tiger just found out that the LS400 dual piston caliper is a direct bolt on.
i'll replace my calipers eventually, they have a layer of rust that can't be removed with wire brush underneath the paint :x

PostPosted: Tue Nov 24, 2009 7:21 pm
by twinjetguy
kenny6683 wrote:very clean!!!! what exhaust are you running?WELCOME!!


Hey Kenny,

We have a local place here called Warners Mufflers who is the place to go to anytime you need exhaust work done. They did a custom cat back with a Magnaflow Resonator and a Magnaflow polished muffler for right around $425 installed. They do quality work.

Thanks man!

PostPosted: Mon Nov 30, 2009 10:05 am
by twinjetguy
Latest pic of my motor.

Image