cp-e install gen 4.5 camry
I am trying to install my cp-e intake on my gen 4.5 camry (2000 1mz) and I have run into bit of a snag. For the wiring into the ecu the top connector (E7) the manual says to attach to the red wire with the grey stripe on pin 16. However the entire connector has no red wire with a grey stripe. What is in pin 16 is a black wire with a yellow stripe. The other connectors all map just fine, it's just E7 that is giving me an issue.
Any help finding the right wire would be great, thanks!
Any help finding the right wire would be great, thanks!
- cj145
- Just Licensed SolaraGuy
- Posts: 22
- Joined: Tue Dec 22, 2009 10:33 am
- Location: Stonington, CT