SolaraGuy.com

i got 3.3 v6 3mz with cpe intake and trd exhuast!!

im putting the same nitrous system mike T's put but he has the injen intake i got cpe maf system so does anybody know if i might have a/f ratio problems or if it will throw cel's and what i can do to fix it...my cpe is untunable and the only other thing i have is trd exhuast.

coldfusion nitrous system

import wet kit single nozzle

gonna start with 35 bump it to 50

got nitrous and cpe on my 1st gen v6. its a wet system, don't know what type mike t's is. no codes or issues with the 55hp shot.

If you don't have a wideband, take it to a shop with a dyno and get it sniffed at wot. It's the only way to be sure your afr's are safe. Codes should not throw unless your afr's are way lean or too rich.

what about my ignition system??
did u change yours or have any issues??

With only a 50 shot, ignition should not be an issue. Just run high octane fuel, 91+.

Can i keep my plugs or do i need copper plugs. Its such a pain getting to the 3 bottom plugs so i would rather not if i dont have to.

If you did anything with plugs you'd just want to go colder. But once again, a 50 shot won't give you problems so long as you're not running super lean or rich.

Can i get away with 75 shot:)