[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Hunting ARP numbers

SolaraGuy.com

Drive faster, live longer.
http://solaraguy.com/

Hunting ARP numbers

http://solaraguy.com/viewtopic.php?f=55&t=52265

Page 1 of 1

Hunting ARP numbers

PostPosted: Wed Sep 21, 2011 8:17 am
by ecms171
I'm chasing some ARP Head and main studs, but they dont make them for the 1MZ's.

I have done a fair amount of googling and forum scouring but i can't find anything solid.

So does anyone have any information i can run off?

Re: Hunting ARP numbers

PostPosted: Tue Nov 08, 2011 5:32 pm
by Smaay
look on MR2oc.com there are alot of guys building 1MZ, 3MZ, 2GR, builds in their MR2s and they might know of a source for ARP studs.

here i did some work for you, these might work. as for the main studs, unless you are making over 400HP the stock bolts will be fine.

http://www.monkeywrenchracing.com/produ ... ts_id=1303

Re: Hunting ARP numbers

PostPosted: Fri Nov 18, 2011 3:53 am
by ecms171
Hey man thanks for the reply, im running a 1MZ not the 2GR, and im aiming for well over 600hp. A custom twin turbo setup is in the works aiming for about 25psi on meth. I have decided to measure them up myself and just contact arp and get them direct. Unless you know if the 2Gr bolts = 1MZ bolts.

Thanks for teh reply
All times are UTC - 8 hours [ DST ]
Page 1 of 1
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/