BuddhaSLE2000 wrote:Yeah I saw his tutorial first but he didn't have any pictures I'm going to use your pictures and his tutorial to hopefully create something as good as you guys.
If you need more help or more pictures ill be glad to help, you can always ask me or FLASH.
*** Tips ***
* When removing the headlight assembly, you have to take out the corner light first, than the front grill ( it just snaps right off with clips on the bottom from the inside ).
* After the corner lights are out there should be two 10mm nuts that you have to take out.
* Oh and you don't have to unplug the wire harness for the bulb after you take it out, it's much easier when the assembly is out.
* If you are scared to try the oven to heat it up, You can use a heat gun and slowly heat the sealant ( butyl ) and carefully pry away the lens.
* I also recommend Cleaning and wax the clear lens while it is already out, just to make it look a lot better. I used Plastic Polish from Meguires to clean the lens.
* I used Plasti Dip to paint mine black, just in case of something to happens or if I want to change it, I can just peel it right off.
That's Basically it, Good Luck and post pics after your done, i would like to see the results.
