Need help with headlights.
Posted: Mon Oct 31, 2011 7:56 amGents, i need some help. i got a nissan murano 2004 projectors installed in my 1999 toyota solara. the murano projector comes with 3 wires. ground, plus for the low beam and plus for the highbeam (where it just moves a piece of metal to open the projector more and get more light out of it)
my problem is:
i can get the low beam to work, however when i switch to high beam, the low beam turns off and the metal piece does open as it should when high beam is activated.
what do i need to do to make my low beam stay on when i activate high beam. so this way my set up can work. will post pics and all the steps i did to fit them in a bit later. all help is very much apriciated.
my problem is:
i can get the low beam to work, however when i switch to high beam, the low beam turns off and the metal piece does open as it should when high beam is activated.
what do i need to do to make my low beam stay on when i activate high beam. so this way my set up can work. will post pics and all the steps i did to fit them in a bit later. all help is very much apriciated.