[UPDATED-DriveBy] new exhaust system 2.5" pipe

by **Robert** » Sun Apr 12, 2009 12:03 pm

EDIT:
This is a v6, 2.5" pipe from the cat back, removed stock resonator going through a Forza Muffler

Please DO NOT remove the Resonator on your I4 as it will sound like JUNK
/EDIT

Got my new exhast put in

unfortunately the f*ckNuts at the welding shop over estimated the bend passed the axel & went through 3 pipes to get it right...

TOOK 4 HOURS -_-

But the diligent welder made sure that it was spot on & there were no leaks, His welds were perfect and he obviously cared about what he was doing.. So for the most part i am very happy with it

So, not mandrel bent & it's a catback system, we went with 2.5" pipe & not 3" pipe ( This is not a mistake i hope )

The tip is a Forza exhaust & retailed for $200, but i got for free since i helped my budy's shop set up his vinyl plotting system

ok, so here's the video
The smoke is not smoke, but steam FYI, it's cold outside
I also didn't rev too high, don't want to piss off new neighbors

http://www.youtube.com/watch?v=FGiU4b2YzIw

Here is the drive by, & Full RPM Rev
Driveby:
http://www.youtube.com/watch?v=hqsNfWv3tTc

Full Rev:
http://www.youtube.com/watch?v=er1MHYsKemg

by **Mr_Chunkz** » Sun Apr 12, 2009 12:13 pm

has a good, smooth tone
film a drive by vid =]

by **D-money** » Sun Apr 12, 2009 1:15 pm

thats nice i have the same setup and love it mine sits a little lower though

by **gnegroni** » Sun Apr 12, 2009 1:20 pm

Mr_Chunkz wrote:has a good, smooth tone
film a drive by vid =]

Yeah, do it!

Please also do an in-car video.

by **Robert** » Sun Apr 12, 2009 2:05 pm

sure thing, i'll do one in an hour or so

by **1gSE** » Sun Apr 12, 2009 2:29 pm

sounds good. +1 for the drive by

by **Robert** » Sun Apr 12, 2009 3:35 pm

Updated

Links above

by **1gSE** » Sun Apr 12, 2009 3:42 pm

i like! Sounds better than mine lol

by **Robert** » Sun Apr 12, 2009 5:48 pm

lol, well thanks, don't think i've heard yours

by **gnegroni** » Sun Apr 12, 2009 6:56 pm

Robert wrote:lol, well thanks, don't think i've heard yours

AWESUM!

by **yoboyandre** » Sun Apr 12, 2009 7:24 pm

=O

I WANT ONE!!

by **yoboyandre** » Sun Apr 12, 2009 7:31 pm

http://cgi.ebay.com/ebaymotors/OBX-%2f- ... 7560QQcmdZ

is this it!???!!!???

by **Ilovemylara** » Sun Apr 12, 2009 7:56 pm

sounds great man, although i still prefer my straight pipe :p

by **Robert** » Sun Apr 12, 2009 8:17 pm

yoboyandre wrote:http://cgi.ebay.com/ebaymotors/OBX-%2f-Forza-Muffler-HR06-Accord-Civic-Tercel-Camry-Rsx_W0QQitemZ180296957560QQcmdZ

is this it!???!!!???

That's the one

Note that i went with Crush bent 2.5" pipe from the Cat back

in this process the factory Resonator was eliminated

it wont sound the same with the resonator

by **yoboyandre** » Sun Apr 12, 2009 8:32 pm

http://cgi.ebay.com/ebaymotors/OBX-%2f- ... dZViewItem

well i found this one too.. the inlet is 2.5 so this is exact match??

and the pipe and that whole process, how much did it cost?

[UPDATED-DriveBy] new exhaust system 2.5" pipe

[UPDATED-DriveBy] new exhaust system 2.5" pipe

Who is online