'LARA spokes on SUPRA?

by **crispone** » Fri Jun 15, 2007 5:01 pm

^^^ Set the DIRTY set of original 'lara spokes against the soup for "kicks"...

...then I thought... hmmm... an interesting fit?

^^^ The stock "sawblades"... while "very sleeper"... are pretty dated, no?

What do you guys think?

-crisp :evilbat:

by **SolaraBlue** » Fri Jun 15, 2007 5:07 pm

i say go for it crisp! i think it would look clean as balls!!!
make sure you get spacers if it needs them. but yeah, should look really good.

by **---CAMRAZY---** » Fri Jun 15, 2007 5:08 pm

Get spacers, dont forget....

by **crispone** » Fri Jun 15, 2007 5:12 pm

How far out should I "space" them?

37 offset on the sawblades... compared to 40, I believe?

...also of note, the sawblades are 16's!!! ...and I believe they are actually 7.5" instead of 7" wide... can't be "pinchin'" the 255's anymore! :-?

MOST IMPORTANT! WHAT SIZE SPACER???

Milt?

-crisp :evilbat:

by **woa_its_j3ff** » Fri Jun 15, 2007 9:48 pm

actually, that'd look REAL nice Crisp..

by **PXLpainter** » Sat Jun 16, 2007 10:35 am

I'd go 5mm. It would be an interesting look for sure... and yeah, the OEMs look like 80's Nissan wheels IMO.

by **CosmicGrooves** » Sat Jun 16, 2007 11:39 am

If those wheels fit, they would look sweet on your Supra.

by **RDKamikaze** » Sat Jun 16, 2007 12:21 pm

Crisp, that's a great idea! I say go for it. Pics when you're done, please

by **---CAMRAZY---** » Sat Jun 16, 2007 2:26 pm

Also are the bore center the same? I think the supra's are a little bigger...

Jeff, 5 mm's are nothing... at least a 10-15 to start.

by **theprodigy79** » Sat Jun 16, 2007 2:30 pm

Surprisingly I think they'd look pretty good! Def post pics if you decide to do them!

by **---CAMRAZY---** » Sat Jun 16, 2007 3:18 pm

I would have this done to them....

http://my350z.com/forum/showthread.php?t=153412

Add 2 inches to the rear rims making it a 17x9....... then used a 30-45mm spacer with a nice, stretchy but fat tire, with some nice poke to the rear......

lol, yeah... too much work.

but hey....

by **crispone** » Sat Jun 16, 2007 5:14 pm

---CAMRAZY--- wrote:I would have this done to them....

http://my350z.com/forum/showthread.php?t=153412

Add 2 inches to the rear rims making it a 17x9....... then used a 30-45mm spacer with a nice, stretchy but fat tire, with some nice poke to the rear......

That is SICK! I would VERY much like to have the rear rims in 9 or more... with 8's in the front, and a stagger, with AT LEAST 255 rears...

Here is a current inspiration from a German dude with some pretty good skills. (His motor is pretty sweet... seriously built. I think this is SALACIOUSLY SEXY... (9.5 rears w/255/40/17 and 8 fronts w/235/45/17)

^^^ I know! The TAG would have to fall!

The other one was a Midnight Blue that MILT posted way back... had the Greddy lip and some deep rims. Can't find it, though.

In the MEANTIME... we'll take a look at the spokes and see how that fits!

(I'll be wearing 235/50/17 Potenza's on them... intended for the 'lara, ultimately...)

THANKS for the feedback, guys. I always DID like the stock rims... but I think they may look better on the Supra! Go figure...

-crisp :evilbat:

by **SolaraBlue** » Sat Jun 16, 2007 5:22 pm

^^^ that is a dead sexy supra. with those wheels and from than angle it reminds me a lot of an 8-series bmw

by **PXLpainter** » Sat Jun 16, 2007 5:29 pm

ROFLOL!!

Professor Milton at the Blackboard! :rofl:

Though it looks like fake titties and really short legs!

by **Paladin06Greg** » Sat Jun 16, 2007 5:57 pm

NO!!!!

Would you sport these for fun?

'LARA spokes on SUPRA?

'LARA spokes on SUPRA?

Who is online