DIY: cabin air filter
-open your glove box
-you will see a little hinge on the right with a screw in it
-unscrew it and take apart the hinge
-then press both sides of the glove department on the black plastic inward
-that will release the glove department and just lay it on the floor
-then if look you will see a white box, move out the wires from it while trying to pull it out.
-then take the filter out and replace with the new
-after that follow the arrow on the box to make sure it is going inside upright.
-after that just attach the glove box and screw the hinge back together
-and thats it
hopefully this may help, i will take pictures when i have a chance.
-you will see a little hinge on the right with a screw in it
-unscrew it and take apart the hinge
-then press both sides of the glove department on the black plastic inward
-that will release the glove department and just lay it on the floor
-then if look you will see a white box, move out the wires from it while trying to pull it out.
-then take the filter out and replace with the new
-after that follow the arrow on the box to make sure it is going inside upright.
-after that just attach the glove box and screw the hinge back together
-and thats it
hopefully this may help, i will take pictures when i have a chance.
***GROUP BUY - JP Headers & Y pipe for Gen 2 V6!!!
http://www.solaraguy.org/viewtopic.php?t=32382
http://www.cardomain.com/id/biggi_e
http://www.solaraguy.org/viewtopic.php?t=32382
![Image](http://memimage.cardomain.net/member_images/4/web/2044000-2044999/2044857_122_full.jpg)
http://www.cardomain.com/id/biggi_e
- Biggi_e
- SolaraGuy Semi-Pro Racer
- Posts: 3279
- Joined: Sun Jul 03, 2005 11:07 am
- Location: G-burg, Murdaland