[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - HELP!!! Where to put HID ballast placement
Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.

HELP!!! Where to put HID ballast placement

HELP!!! Where to put HID ballast placement

Postby un0john0fodg » Sat Feb 24, 2007 8:15 pm

Where did you guyz put the HID ballast on the drivers side? I can't find a place to secure it firmly :cry: HELPPP!!!
un0john0fodg
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 88
Joined: Fri Mar 17, 2006 1:32 pm
Location: Garden Grove, So Cal

Postby funboy102 » Sat Feb 24, 2007 8:18 pm

you drive a Gen 1? well, I drive a Gen 1 and I put my driver side ballast right under the battery. It fits snugly right between the battery and the chassis of the car. Just remove your battery, and put it under it
Image
1999 Solara SE V6 5-Speed PICS! http://www.solaraguy.com/viewtopic.php?t=43759
User avatar
funboy102
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1051
Joined: Mon Jun 19, 2006 7:32 pm
Location: Pensacola, FL

Postby Yanks0114 » Sat Feb 24, 2007 10:05 pm

Under the battery. Here are some pics of my install http://travel.webshots.com/album/188391551CUIZyt

Image
Yanks0114
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 4756
Joined: Sat Aug 24, 2002 12:01 am

Postby Yanks0114 » Sun Feb 25, 2007 12:36 am

A little more info:

There were actually pre-drilled holes that worked almost perfectly for my ballast. I used cable ties to attach it to the car. The cable tie looped through the holes in my frame into the holes in my ballast.

In order to get to that spot, I removed the battery and the tray below the battery.

____
The other side had similar mounting holes, but in this case you'll have to remove the headlight.
Yanks0114
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 4756
Joined: Sat Aug 24, 2002 12:01 am

Postby un0john0fodg » Sun Feb 25, 2007 2:55 pm

Thx guyz!!!
un0john0fodg
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 88
Joined: Fri Mar 17, 2006 1:32 pm
Location: Garden Grove, So Cal

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 28 guests