Since there's all this turbo talk...
I was gonna keep this a secret from you guys until i finished, but i wont be like that So....i picked up a 28x5.5x2.5 front mount intercooler, a used bosch blow off valve (i think its a stock 1.8t unit), bought jims fuel mod from killa cam. My Holset H1C snail (old school!!) should be here tomorrow...well it should have been here today but all this snow got dumped on us last night. It needs a rebuild....that kit should be here..tomorrow or thursday, i'll rebuild it saturday if it gets here in time and send off the parts to get balanced. I'll be using a 38mm tial to keep it in check. I doubt the 2jz injectors i have are gonna be enough, so i'll be looking into some rc injectors, or some 88 non turbo rx7 460cc's since i read they're supposed to work over on TN. Tuning will be handled by an AEM FIC, that i bought. It shipped today, i just need to call up AEM and get the flying lead since the guy i bought it from had a PnP harness for a scion tc. I'm also gonna pick up an extension harness ( JEGS http://www.jegs.com/i/AEM/017/30-2989/10002/-1# Midias, care to add that to the aftermarket parts list?)) so i won't have to cut into the factory wiring harness. Some VDO gauges (boost and oil pressure) are on the way. So far total spent, not including shipping, 754. Yes folks, thats turbo, intercooler, engine management and some more
yes i'm gonna clean it up before i put it on
it's got a rather large turbine housing, but i seen it spool on a low
compression KA24DE...it should work nicely on the 1mz
FIC > emanage
More, updated pix to come when the parts get here
yes i'm gonna clean it up before i put it on
it's got a rather large turbine housing, but i seen it spool on a low
compression KA24DE...it should work nicely on the 1mz
FIC > emanage
More, updated pix to come when the parts get here
Last edited by 1gSE on Tue Mar 24, 2009 6:05 pm, edited 1 time in total.
GTO-Vararam/Kooks/Spintech/MGW-P/Tune-12.9 @108
Solara-M62 @ 5.5psi
-
1gSE - SolaraGuy Semi-Pro Racer
- Posts: 2050
- Joined: Wed Apr 11, 2007 8:37 pm
- Location: Abilene, TX