7 psi belt length...+methanol
Hey guys,
So, I finally talked myself out of parting out the solara...and instead am installing a 6.5 lb pulley and my methanol kit. Just curious what belt you guys are running for belts on 7 psi? I figured that would be close enough to 6.5 psi to keep it nice and snug on the SC. I am getting some slippage now, on my 5.5 pulley so I want to eliminate that for the future. I have the automatic tensioner...should I replace that too? It seems really easy to pull the belt up, like the tensioner isnt maintaining strong deflection.
Also, what is the consensus on the nozzle size and location for the Methanol folks? There seems to be quite a range of info on that side...hoping this will finally get me to the 300 whp mark. Thanks!
So, I finally talked myself out of parting out the solara...and instead am installing a 6.5 lb pulley and my methanol kit. Just curious what belt you guys are running for belts on 7 psi? I figured that would be close enough to 6.5 psi to keep it nice and snug on the SC. I am getting some slippage now, on my 5.5 pulley so I want to eliminate that for the future. I have the automatic tensioner...should I replace that too? It seems really easy to pull the belt up, like the tensioner isnt maintaining strong deflection.
Also, what is the consensus on the nozzle size and location for the Methanol folks? There seems to be quite a range of info on that side...hoping this will finally get me to the 300 whp mark. Thanks!
99 DWP SEV6 5spd 6.5psi+Meth, Tein+Tokico, EricSol+Brembos+EBC, OBX Headers+OBX 3" Exhaust, Supra MAF & 330cc, Spec 2+, Fidanza, TRD lip kit, Injen+Ext, Optima Red, Infinity 60.5+693.7i, 2 Kappa Perfect 12 VQ's+iPod+JVC DVD...etc
-
hskrsolara - SolaraGuy Supporter
- Posts: 3070
- Joined: Tue Jan 25, 2005 12:04 am
- Location: The Northland