Thanks to Gabe@GLP Motorsports finally supercharged
Well it's finally done first off I have to thank Gabe. Even though he was just the company selling it to me as a paying customer. Gabe goes far and beyond after delivery of the product. His knowledge of our cars is a valuable resource to this community and to me during my installation. He also set me up with some custom pieces that took a little longer but it was well worth the wait as the quality speaks for itself. I realize and I hope others do that GLP offers products and services to a very niche market that has been hit hard by the economy. Others like TRD and URD left us a long time ago and I'm happy GLP is here today.
Gabe warned me about the crappy 91 pisstane in California that I might need a fuel mod. The weather here has been in the 100's. I have a TRD 160 thermostat and the coolant temps have been around 175-185F. IAT's around 130F it likes to heat soak in traffic. On the freeway IAT's are around 10F over ambient. I cannot not even guess how much hotter it is after being compressed by the blower. I set a code P0330 front bank knock sensor but no lean codes. So I did the rewire at the knock sensor harness where it plugs into the main harness under the throttle body area. For insurance in the meantime I found a 76 station that has pump VP100 so I'm blending in 4 gallons to a full tank.
![Image](http://i145.photobucket.com/albums/r219/alltrac/257.jpg)
Gabe warned me about the crappy 91 pisstane in California that I might need a fuel mod. The weather here has been in the 100's. I have a TRD 160 thermostat and the coolant temps have been around 175-185F. IAT's around 130F it likes to heat soak in traffic. On the freeway IAT's are around 10F over ambient. I cannot not even guess how much hotter it is after being compressed by the blower. I set a code P0330 front bank knock sensor but no lean codes. So I did the rewire at the knock sensor harness where it plugs into the main harness under the throttle body area. For insurance in the meantime I found a 76 station that has pump VP100 so I'm blending in 4 gallons to a full tank.
![Image](http://i145.photobucket.com/albums/r219/alltrac/257.jpg)
-
alltrac92 - SolaraGuy Driver
- Posts: 409
- Joined: Mon Mar 10, 2008 10:12 pm
- Location: Citrus Heights, CA