Engine won't start, SC install
so this weekend i install my supercharger on my car. i ran into a few problems but finished the install.
so when i went to start her for the first time all the car did was turn over 3 or 4 times then a clunk and won't run. the belt is turning and i can smell fuel. not sure if the belt isn't tight enough or maybe too tight. i have the auto tensioner.
i really don't want to keep turning the key and break my engine. any one have a problem like this???
EDIT: when i turn the key this is a loud noise coming from the engine, not the charger or idler plate area. it almost sounds like the engine is seizing
so when i went to start her for the first time all the car did was turn over 3 or 4 times then a clunk and won't run. the belt is turning and i can smell fuel. not sure if the belt isn't tight enough or maybe too tight. i have the auto tensioner.
i really don't want to keep turning the key and break my engine. any one have a problem like this???
EDIT: when i turn the key this is a loud noise coming from the engine, not the charger or idler plate area. it almost sounds like the engine is seizing
building a 5.5psi S/C 3MZ 5spd with Meth, 305cc injectors, lite weight crank pulley, Apexi Neo, full exhaust & ypipe, CAI, TB spacer, knock upgrade, jims fuel upgrade, walbro 255, and much much much much more
- Bostonlara
- Regular SolaraGuy Member
- Posts: 138
- Joined: Mon Jul 02, 2012 8:31 pm
- Location: Boston, MA