[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Homemade oil catch can
How to, DIY, and Get 'er done.

Homemade oil catch can

Homemade oil catch can

Postby usoff89 » Tue Sep 21, 2010 7:55 pm

Ok, So I was getting alot of "blow-by" into the intake. I can't afford a nice catch can at the moment, but found this solution. I used a air compressor filter and put it in the vacuum line going to the intake from the valve cover. It's very simple and seems to be working great. I had this filter lying around in the garage, but you can pick one up at the local hardwhare store about $20.

So far I've put about 250 miles on the set up, and here's the pictures.
Image
Image
Image
Image
99 SuperCharged Lara
14.7@93 on 1/4mile (average)
Fastest run so far - 14.65@93
4.5psi
User avatar
usoff89
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 84
Joined: Thu Mar 04, 2010 4:01 pm

Re: Homemade oil catch can

Postby 1gSE » Tue Apr 12, 2011 1:04 am

I'm gonna stop by a local hardware store and see if I can pick one up. I really don't want to wait for a catch can to be shipped to Greece. I noticed a little dirt/oil around the hose on the intake that was never before I put the sc on.
Image
GTO-Vararam/Kooks/Spintech/MGW-P/Tune-12.9 @108
Solara-M62 @ 5.5psi
User avatar
1gSE
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2050
Joined: Wed Apr 11, 2007 8:37 pm
Location: Abilene, TX

Re: Homemade oil catch can

Postby ToyoSolV6 » Tue Apr 12, 2011 1:08 am

yeah same here ill prob get one too.
Image
One of the few Built Forged Supercharged solaras in so cal
335whp x 344tq.
User avatar
ToyoSolV6
Solaraguy's dopest driver
Solaraguy's dopest driver
 
Posts: 3505
Joined: Tue Jun 24, 2008 5:38 pm
Location: City of Angels, CA

Re: Homemade oil catch can

Postby 1gSE » Tue Apr 12, 2011 1:39 am

with as much water/meth I go through, whatever oil has built up probably got clean off :D
Image
GTO-Vararam/Kooks/Spintech/MGW-P/Tune-12.9 @108
Solara-M62 @ 5.5psi
User avatar
1gSE
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2050
Joined: Wed Apr 11, 2007 8:37 pm
Location: Abilene, TX

Re: Homemade oil catch can

Postby jorgea » Sat Mar 08, 2014 8:27 am

This is nice. Thanks for posting
jorgea
Just Licensed SolaraGuy
 
Posts: 2
Joined: Sun Apr 15, 2012 10:05 am

Return to Tutorials

Who is online

Users browsing this forum: No registered users and 1 guest