[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - searched w/no luck...
Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.

searched w/no luck...

searched w/no luck...

Postby djsaltine » Thu Dec 02, 2004 9:52 pm

I was using search to find out anything about front end conversions but found nothing. I just
kept getting bodykit info.

I'd like to replace my 99 front end w/ an 01-03 instead. I personally like the more angled nose
of the later 1.5's, especially w/ the Molly kit. Any suggestions? Is there a possibility or am I
just wasting time, effort, & $. Any input is greatly appreciated.
Thanx, Will
'Get Higher Baby... and You'll Never Come Down'- Grand Master Flash

http://members.cardomain.com/djsaltine

http://fairtax.org
djsaltine
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 786
Joined: Tue Oct 26, 2004 7:06 pm
Location: Atlanta, GA

Postby Mole » Thu Dec 02, 2004 9:59 pm

there have been a couple of people i know that did that.

you will need enough money to change the whole front part. (bumper,lights) and i think some re-wiring. but not too sure.
the power of 8
User avatar
Mole
molerator
molerator
 
Posts: 1677884
Joined: Sun Apr 20, 2003 12:25 pm
Location: Glendale, Ca

Postby pythonjosh » Thu Dec 02, 2004 10:06 pm

This has been discussed a number of times. You will need the 02-03 left and right fenders, front bumper cover, headlights, foglights and convert your headlight system to the 9006's as the gen1's use the single bulb, H4's. Which is easy, you just need the 9006 harnesses. Search for gen 1.5 conversion.
Brilliant Silver 03 Nissan G35 6MT

In the struggle for justice, I is prepared to lay my life on the line. Just like Martin Luther Vandross did.
User avatar
pythonjosh
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1860
Joined: Mon Sep 01, 2003 5:53 pm
Location: Torrance, CA

Postby Jai_Jai_Binks » Fri Dec 03, 2004 8:57 am

^^ all he said AND add gen 1.5 cornerlights as well!
User avatar
Jai_Jai_Binks
Desi SolaraGuy
Desi SolaraGuy
 
Posts: 5751
Joined: Fri Jul 12, 2002 11:59 am
Location: Friendswood, TX

Postby djsaltine » Fri Dec 03, 2004 3:01 pm

Thanx for the input so far, I'll do my best to find the thread.
'Get Higher Baby... and You'll Never Come Down'- Grand Master Flash

http://members.cardomain.com/djsaltine

http://fairtax.org
djsaltine
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 786
Joined: Tue Oct 26, 2004 7:06 pm
Location: Atlanta, GA

Gen 1 to Gen 1.5 bumper conversion question

Postby michaels artic frost » Fri Dec 03, 2004 4:04 pm

Updated 06/01/12: Michael T's
Updated 06/01/12: JUICED! 232whp 294ft/lbs of torque
"Every passing minute is another chance to turn it all around."
User avatar
michaels artic frost
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 3965
Joined: Wed Feb 25, 2004 11:17 pm
Location: Kentucky

Postby djsaltine » Fri Dec 03, 2004 6:17 pm

Thanks Michael,
Looks like a little too much trouble, and $ for the outcome.
Bodykit, here I come.
Thanx again, Will
'Get Higher Baby... and You'll Never Come Down'- Grand Master Flash

http://members.cardomain.com/djsaltine

http://fairtax.org
djsaltine
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 786
Joined: Tue Oct 26, 2004 7:06 pm
Location: Atlanta, GA

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: Google [Bot] and 18 guests