[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Bolt Sizes HELP!!!
Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.

Bolt Sizes HELP!!!

Bolt Sizes HELP!!!

Postby Smokeyone22 » Tue Feb 08, 2005 6:33 pm

Anyone who has lowered there car know what size sockets they used to everything.....removing the front and back struts, taking off the old springs to reuse bolts and whatnot off of old struts? Please help i need to make sure i have ALL the right sockets before i start to lower my car cause if i start and dont have them i am basically screwed. Thanks for the help

:D
2001 Solara V6 SE
Smokeyone22
Just Licensed SolaraGuy
 
Posts: 48
Joined: Tue Aug 03, 2004 7:15 pm

Postby lazyboyz69 » Tue Feb 08, 2005 8:24 pm

you are suppose to reuse old bolts, top and bottom rubber insultor, don't have to cut the bump stop you can if you want to, watch out for the abs line you might brake the senor, i sent you a diagram, jsut basically take out the spring and strut and put the new one in...for the front...
5 spd v6 supercharged, TRD kit,TRD short shifter,TRD Rear Sway Bar,TRD Front Tie Bar,TRD Exhuast,Rear B&G Damper System, tien/tokcio front,18" Axis Seven,Walbro 190 fuel pump,
lazyboyz69
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 349
Joined: Mon Aug 30, 2004 10:55 pm
Location: SO. CAL

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 13 guests