Any place we could buy Solara parts?

[xyntax]

Guess what? I guess it was bound to happen anyways. The driver side support bracket where the sway bar bushing holds on to ripped apart. Its a thin piece of metal about 2.5"x7" in dimension. Some of you may remember that I set my TRD RSB to track setting. I kept my stock suspension setup, so the RSB has been taking all the pressure when I corner. I just found out the weakest link in that area

Is there any place where we could buy parts for our cars, without ever going through the stealership? I hate the Toyota service dept here coz they're lazy assholes who pull out number out of their asses.

When I fix that part, I'm just gonna have to switch my RSB to street setting. For all of you who upgrade TRD RSB w/o changing your suspension: learn from this lesson.

[RichD978]

would this happen if we set it to street setting with stock suspension?

[Paladin06Greg]

I get all my Toyota parts from Bill G at e-maill addy sales@anythingtoyota.com. Bill is good, fast and has very reasonable prices. Drop him an e-mail or give him a call at 1-800-527-5368. Tell him Greg with Silverlicious sent you..

Guess what? I guess it was bound to happen anyways. The driver side support bracket where the sway bar bushing holds on to ripped apart. Its a thin piece of metal about 2.5"x7" in dimension. Some of you may remember that I set my TRD RSB to track setting. I kept my stock suspension setup, so the RSB has been taking all the pressure when I corner. I just found out the weakest link in that area

Is there any place where we could buy parts for our cars, without ever going through the stealership? I hate the Toyota service dept here coz they're lazy assholes who pull out number out of their asses.

When I fix that part, I'm just gonna have to switch my RSB to street setting. For all of you who upgrade TRD RSB w/o changing your suspension: learn from this lesson.

[xyntax]

Thanks Greg! I'll do that.

...if set on street setting? I hope this wouldn't happen still. But if it still does, then it would be a longer time than when set to track setting.

[xsolara33x]

^^^ hey bro, call the dealer and find the part number... my friend works for worldpack here in san ramon and he gets parts dirt cheap... let me know the part number and let me see if he can get it for you...
raphael

[Paladin06Greg]

Good luck but I've never found anyone cheaper then BG and he will give you the Silverlicious special price..

^^^ hey bro, call the dealer and find the part number... my friend works for worldpack here in san ramon and he gets parts dirt cheap... let me know the part number and let me see if he can get it for you...
raphael

[Hsakuragi]

so u are saying i turn my corners not good enough? hahaha

u are talking about the U bracket right?

[Hsakuragi]

Rear suspension --> Suspension components -->Stabilizer bar --> Bracket


5 bucks

[xyntax]

^ I don't push my Solara on corners really hard. Although, maybe driving the RX-8 all the time really changed my driving habits. BTW, it's not a part of the sway bar. Its the section where the sway bar bushing clamps on to. I'm assuming the U-bracket you're referring to as the bushing clamp. That's pretty sturdy if you ask me.

[Hsakuragi]

[Hsakuragi]

my bad, let me know if the part u looking for is on the pic

[xyntax]

^ Where did you get those pics from? I've been looking for that website I usually check years ago. I seem to have lost the URL. You see that part 23? It should be above that, and kinda looks like part 25 but smaller and thinner.