WTB Solara After Market Door Sills??

[Paladin06Greg]

I've searched far and wide on the net with no luck. Can anyone help me out?

[udonoogen]

i'd be interested, too.

[indiglosolara]

I made my own custom ones... very simple trd badge...

ill get some pics and forward to you when i get a chance...

[Paladin06Greg]

OK, cool. I've put a TRD badge on my door sills but what I'm after is something CF or polished alum..

I made my own custom ones... very simple trd badge...

ill get some pics and forward to you when i get a chance...

[Paladin06Greg]

BINGO!!!!!

http://store.yahoo.com/brandsportinc/to ... 06040.html

[cdeez]

will that fit on the gen 1s as well?

[Paladin06Greg]

I think so. What difference is there between the 2000 thru 2003 door jam? None that I know of. Anybody else what to jump in with a comment?

will that fit on the gen 1s as well?

[cdeez]

well, let me know if they fit, cause i might invest in some...

i really never looked at the difference between the two.., maybe length?

btw, your car gets hotter and hotter....much props brotha...

[Paladin06Greg]

I'll let you know and thanks.

well, let me know if they fit, cause i might invest in some...

i really never looked at the difference between the two.., maybe length?

btw, your car gets hotter and hotter....much props brotha...

[Astro]

They will fit. Before I installed June's, I tested it on mine. The only thing is that it's a little taller, but you can just lay something in between. They are really nice, except for the fact you have to be very careful because it looks like it'll scuff up pretty easy. Take some pics when you get it installed.

[Paladin06Greg]

Thanks for the info and pics will be posted.

They will fit. Before I installed June's, I tested it on mine. The only thing is that it's a little taller, but you can just lay something in between. They are really nice, except for the fact you have to be very careful because it looks like it'll scuff up pretty easy. Take some pics when you get it installed.

[JAYDEE23]

i program cnc machines. if i can find some time this would be a nice project. pretty easy too.

once the measurements are correct, and i draw it up in cad and program it i can turn em out pretty quickly.

only time after the initial programming would be getting the bend correct.

mabey i will just copy the stcoker in dimensions? they dont have any bends do they..

ill let you all know. i could make em for alot less than $100

[Astro]

You can also go here to buy them. $75.00 + $8.95 Shipping
Total: $83.95

*click on pic*

[JAYDEE23]

i have the cad drawing complete for the door sills and will try to complete one by the weekend and post pics of it installed.

looks like the mounting will have to be either screws w/ some type of anchor bolt or just dounble sided tape.

i will sell these at least half of what they cost online not really looking to make money.

and let me know if you all have any good ideas before i make the program to make them

examples
-text on em..
-type of metals
finish etc..

small changes will not be difficult once the base perimeter program is complete so custom sills can be produced

i have access to all kinds of metals and can program just about any desing in it however the desing will have to be cut through as i do not have time to etch the design

[indiglosolara]

You can also go here to buy them. $75.00 + $8.95 Shipping
Total: $83.95

*click on pic*

Those look like they are made for the gen 1/1.5 form the picture. The seats look exactly the same.

Looks nice!!