[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - CEL codes appear on the scanner

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

CEL codes appear on the scanner

CEL codes appear on the scanner

Postby aznturboz » Thu Jul 14, 2005 1:14 pm

the following codes that appear on the scanner were p0125,p1153,p1155. So is there anyone out their could help me with this problem and solve it?
aznturboz
Just Licensed SolaraGuy
 
Posts: 16
Joined: Thu Sep 09, 2004 11:51 am
Top

Postby ZXLNT » Fri Jul 15, 2005 12:18 am

P0125 Insufficient Coolant Temperature for Closed Loop Fuel Control


P0153 O2 Sensor Circuit Slow Response (Bank 2 Sensor 1)

P0155 O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)
ZXLNT
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 310
Joined: Wed Nov 06, 2002 5:36 pm
Location: topeka ks
Top

Postby ZXLNT » Fri Jul 15, 2005 12:19 am

Also you would be amazed at what you can google up. I used Toyota obdii codes in google and came up with a nice post on Toyota nation that had all the OBDII codes listed.
ZXLNT
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 310
Joined: Wed Nov 06, 2002 5:36 pm
Location: topeka ks
Top

Postby aznturboz » Fri Jul 15, 2005 3:15 pm

How would I repair this problem anybody? My car has been acting funny. Last night when I was driving. The car was shaking, and the accelation felt kinda heavy. Also adding as i acclerating the car shakes and was driving kinda slow too. After 5 mins the car feel fine and back to normal. But engine light is still on. My mechanic told me like a month ago that i need to replace the ecm, due the diagnosic he perform at the car. So can anyone confirm this for me.
aznturboz
Just Licensed SolaraGuy
 
Posts: 16
Joined: Thu Sep 09, 2004 11:51 am
Top

Postby Astro » Fri Jul 15, 2005 3:25 pm

Shouldn't you reset it, drive around a bit, and then check it again to see if it clears them first?
ImageImage
Lexus lip kit, LED tails, F-Sport Intake, HKS hi-power exhaust, TEIN S-tech springs
User avatar
Astro
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4553
Joined: Wed May 14, 2003 11:33 pm
Location: Sherman Oaks, CA
Top
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 6 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net