My Guage Won't Light up Anymore

[redgreen21]

Yeah, its sucked finding out that it burnt out the board. However I have jury rigged a fix so it works until i put in a fulltime fix tonight. Im going to splice in a wire to bypass the burnt part. To change the bulb in the ashtray, look for the lighting guide through the search at the top. It runs through the whole thing.

[redgreen21]

Well it worked and I again have lights behind my guages!!

[SleeperSolara]

Try the dimmin' knob.
Roll that dim knob all the way to the right.
Then the coin tray near the steerin' column on the left take that out and there will be a diagram of which fuse goes to whic electronic device.
The HVAC controls have 1 and the guages have 1, it could be the bulbs not screwed on tightened all the way.
The fuses under the hood are for the big stuff under the hood.
The lilttle stuff on the inside is behind teh coin tray near the steerin' column.

[StockSolara]

anyone know how to change the bulb in the ashtray... i think there is suppose to be a light there... could use some advice/help

You have to take off the plastic trim than you can get to the light but remember to remove the ash tray and cig lighter be you start pulling it off