YSD Clear Corner's - $18
Hey everyone.
As you know, I have clear corners that were custom made (by the previous owner) and the left one started to have condensation so I took it out and tryied to bake it dry on top of a radiator... it didn't work so I tried to add rubbing alcohol and try to do it that way (because it's volatile, etc. so supposedly supposed to evaporate quickly..)
Anyways, long story short, I left it too long so it cracked.
Basically I'm going to purchase new ones,
http://www.andysautosport.com/product/detail?_p=SONA00060131&_v=vmd00415
I'll let you know if they're any good. The picture is wayyy bad, but again... you never know if it's going to be a good deal.
I'll post up pics and whatnot when I receive them next week... really hope they aren't that all bad, looks like a cross between the stock and the euros, w/out the lines.
God bless.
-----------------------------------EDIT-----------------------------------
Want to see why I need new corners?...
P.S. I think mine are Euro's... I just had to mess them up...
Also, don't tell me about how to get condensation out, if that was condensation I wouldn't care, but it's not. The whitish foggy stuff is the plastic melted and there's cracks... maybe I shouldn't have baked it on a radiator..
As you know, I have clear corners that were custom made (by the previous owner) and the left one started to have condensation so I took it out and tryied to bake it dry on top of a radiator... it didn't work so I tried to add rubbing alcohol and try to do it that way (because it's volatile, etc. so supposedly supposed to evaporate quickly..)
Anyways, long story short, I left it too long so it cracked.
Basically I'm going to purchase new ones,
http://www.andysautosport.com/product/detail?_p=SONA00060131&_v=vmd00415
I'll let you know if they're any good. The picture is wayyy bad, but again... you never know if it's going to be a good deal.
I'll post up pics and whatnot when I receive them next week... really hope they aren't that all bad, looks like a cross between the stock and the euros, w/out the lines.
God bless.
-----------------------------------EDIT-----------------------------------
Want to see why I need new corners?...



P.S. I think mine are Euro's... I just had to mess them up...
Also, don't tell me about how to get condensation out, if that was condensation I wouldn't care, but it's not. The whitish foggy stuff is the plastic melted and there's cracks... maybe I shouldn't have baked it on a radiator..
Last edited by bluesolara on Fri Jan 13, 2006 11:13 pm, edited 3 times in total.
2001 Indigo Ink Pearl SE
H4 6000K/Tein S-tech/Motegi FF7 Gunmetal17'/Kuhmo Ecsta Asx tires/Short Shifter (custom)/Clear Corners//TRD muffler
God bless.
H4 6000K/Tein S-tech/Motegi FF7 Gunmetal17'/Kuhmo Ecsta Asx tires/Short Shifter (custom)/Clear Corners//TRD muffler
God bless.
- bluesolara
- SolaraGuy Driver
- Posts: 724
- Joined: Sun Mar 14, 2004 4:56 am
- Location: San Diego, California