[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - gen 2 rims on gen 1 solara wheel spacer question

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

gen 2 rims on gen 1 solara wheel spacer question

gen 2 rims on gen 1 solara wheel spacer question

Postby returnofthedack » Fri Mar 03, 2006 10:13 am

i've had my custom powdercoated gen 2 rims for a while now, and im finally gonna get some damn tires to put them on. for the wheel spacers, where can i get them and should any tire shop (like mr. tire for example) have them in stock ? let me know thanks! if this has been asked, my bad.
www.seandackermann.com

The only person that can stop you in life, is yourself
returnofthedack
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 625
Joined: Tue Sep 28, 2004 9:59 am
Location: maryland
Top

Postby Jai_Jai_Binks » Fri Mar 03, 2006 11:02 am

I'm not sure what Mr. Tire, but you are correct any tire shop that sells' aftermarket wheels should have them in stock.

Have you researched to decide if your going with what side spacers, 5mm or 10mm.

My suggestion would be for you to take it to a tire shop for 'mounting' the tires on the wheels...there the tire shop at that time can suggest (and at most times try) all spacer sizes to give you a snug fit.

EDIT: FYI - my other car (gen 4 camry) has gen 5 Camry wheels without spacers. I was told that i needed 5mm spacers, but the tire shop said it fit perfectly well w/o them...Also when i had IS300 rims on my solara, i needed spacers..so it all depends on your setup!
Last edited by Jai_Jai_Binks on Mon Mar 06, 2006 9:13 am, edited 1 time in total.
User avatar
Jai_Jai_Binks
Desi SolaraGuy
Desi SolaraGuy
 
Posts: 5751
Joined: Fri Jul 12, 2002 11:59 am
Location: Friendswood, TX
Top

Postby SleeperSolara » Fri Mar 03, 2006 11:04 am

I think 5mm would be best, 10mm would be too big IMO.
But i could be wrong.
Wanted to know what the spacers sizes for the Gen2 rollers on the Gen1.
2000 Solara SE auto V6. Diamond White Pearl.
Top Speed Run finished at 130 mph. :o
Too many modifcations for the signature.
User avatar
SleeperSolara
SolaraGuy Hall of Famer
SolaraGuy Hall of Famer
 
Posts: 9257
Joined: Tue Jun 15, 2004 11:38 am
Location: The 405
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 7 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net