[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Clear Corner Condensation!

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

Clear Corner Condensation!

Clear Corner Condensation!

Postby FLASH » Mon Feb 24, 2003 4:54 pm

I don't get it, I sealed up the corners REALLY good, almost too much and took time and everything, and my left one still got condensation, while the other is fine. Here are some pics of it, its not TOO bad:

Image
Image

Its not too bad right now, but I dont want it to get worse. Is there anyway to fix this problem?
==FLASH==
99 Solara SE with Many Mods (See outdated website) - Weekend Warrior
2001 Cadillac Deville Daily Driver
(Wife's) 2007 Toyota Camry LE with Basic Mods
(Sister's) 2011 "Pink Prius"
FLASH
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1802
Joined: Sun Jan 26, 2003 4:00 pm
Location: South Jersey
Top

Postby 808Camry » Mon Feb 24, 2003 5:01 pm

Could a seal have broken? Maybe you could shot some super glue around it, that should seal up any small nooks that may still exist.

BTW where did you get your titanium bulbs from, also what brand are the? And what color are they when they blink?
808Camry
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 519
Joined: Sun Nov 03, 2002 3:52 pm
Location: Honolulu
Top

Postby FLASH » Mon Feb 24, 2003 6:09 pm

No seal could have broken I REALLY loaded up and let them dry for 24 hours before installation... :-?
The Bulbs are APC Titaniums, 5.99 each - got em at PepBoys and they light up amber. You can get lots of colors.
==FLASH==
99 Solara SE with Many Mods (See outdated website) - Weekend Warrior
2001 Cadillac Deville Daily Driver
(Wife's) 2007 Toyota Camry LE with Basic Mods
(Sister's) 2011 "Pink Prius"
FLASH
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1802
Joined: Sun Jan 26, 2003 4:00 pm
Location: South Jersey
Top

Postby 808Camry » Mon Feb 24, 2003 6:20 pm

Try and shoot some super glue all around, it actually worked when sealing mine up, it wouldn't hurt? BTW does the other side condense too?

About your bulbs are they 3157 or 1157 (wedge base or round base)?
808Camry
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 519
Joined: Sun Nov 03, 2002 3:52 pm
Location: Honolulu
Top

Postby krook » Mon Feb 24, 2003 7:41 pm

yo ron:

1157 for side markers
3157 for back signals
krook
SolaraGuy Supporter
SolaraGuy Supporter
 
Posts: 2676
Joined: Mon Aug 05, 2002 3:18 pm
Location: Hawaii
Top

Postby FLASH » Mon Feb 24, 2003 9:06 pm

If I did Super Glue them AGAIN, wouldn't I need to dry the inside before doing it? And the otherside is perfectly fine, no condensation.
==FLASH==
99 Solara SE with Many Mods (See outdated website) - Weekend Warrior
2001 Cadillac Deville Daily Driver
(Wife's) 2007 Toyota Camry LE with Basic Mods
(Sister's) 2011 "Pink Prius"
FLASH
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1802
Joined: Sun Jan 26, 2003 4:00 pm
Location: South Jersey
Top

Postby pecora55 » Mon Feb 24, 2003 9:45 pm

I had the problem the 1st time i washed my car in a no touch wash and after that 1st time it hasnt happened again...
Goodbye solara, loved you while i had you :( now into my bros hands, and hello Spec V...BYE BYE SpecV HELLO 04 Maxima ;)
-------------------------------
'04 Maxima SE
'03 Sentra SpecV(SOLD)
'99 Solara SLE V6 Auto(SOLD)
pecora55
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 239
Joined: Tue Nov 19, 2002 10:28 pm
Location: phx, AZ
Top

Postby 808Camry » Mon Feb 24, 2003 10:17 pm

take the corner off and blow dry it, then pour the super glue around the edges.
808Camry
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 519
Joined: Sun Nov 03, 2002 3:52 pm
Location: Honolulu
Top

Postby TITO » Mon Feb 24, 2003 11:44 pm

If you really want to make sure all moisture is gone take the corners and set them on top of you clothes dryer with the bulb off of it and the hole facing up and let them sit on the dryer when you are drying clothes all the way through a cycle. The warmth will evaporate all the moisture and you wouldn't have the patience to dry them with a hair dryer long enough.
99 V6, LOWERED, COOL CUSTOM GRILL, TINTED WINDOWS, CUSTOM FRONT BUMPER, WHITE 17" WHEELS, BODY KIT, CLEAR CORNERS, INTAKE WITH K&N.
TITO
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 178
Joined: Thu Dec 20, 2001 5:00 pm
Location: San Luis Obispo, CA
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net