SuperPro RR engine mount poly bushin' & URD crank pulley

[SleeperSolara]

**List for SuperPro RR engine mount**

1. SleeperSolara [John]
2. JavaJoe_2
3. QuickSEV6
4. Solara562
5. sydemoid
6. trd4life [Gabe]
7. PASolara
8. SCV6


** List for the URD under crank pulley**

1. SleeperSolara [John]
2. Facevedo17 ( Cisco)
3. sydemoid

------------------------------------------------------------------------------------

Anyone interested??
I talked to Greg about buyin' his OEM, but he told me to email SuperPro and this was their reply:

Hi John,
thank you for the e-mail,
Mate I'm sorry to say R&D are not going keen to complete the RR Engine mount, due to the current lack of sales on the top Engine steady SPF2706K which was also done for Greg.
Greg did a great job in test fitting the kits and listing it on forums and on his web site, at that time interest was high. To date we have sold a total of 50 kits to our distributor in the USA
and I think last count he still had 40 in stock.
Current sales of this part have not covered time and effort by all put in to complete the part, hence you can see our hesitation to complete the RR Engine mount.

So you see the interested was kind-of high, but not enought make the RR poly engine mount.
I don't think that the bushin' would be that much to get installed or the purchase.
Who all is interested??
Let me know and let's start a list.

I have tried wit the the Torque Rod, and not that much success.
The URD is in the same boat.

Their email reply to me.

We did stop making them. It was a slower mover then we anticipated.

We could do another batch of them, but it would have to be at least 10
units all pre paid. If you wanted to organize it and get 10 prepaid
orders then we would do another run of them.


Gadget
__________________________________________________________________
Underdog Racing Development
www.URDUSA.com

So if we get 10 people wit URD they will start it up again.

Their second reply:

$260 plus $8 shipping for a prepaid order of 10 units.

From the time the complete order is made we are looking at 4-6 weeks to
complete the production and deliver them.


Gadget
__________________________________________________________________
Underdog Racing Development
www.URDUSA.com

So who all is interested in the URD crank pulley??
Make a list also.

[Midias]

I have the urd pulley I could really notice the engine feeling lighter.

[QuickSEV6]

Anyone interested??
I talked to Greg abotu buy his OEM, but he told me to email SuperPro and this was their reply:

Hi John,
thank you for the e-mail,
Mate I'm sorry to say R&D are not going keen to complete the RR Engine mount, due to the current lack of sales on the top Engine steady SPF2706K which was also done for Greg.
Greg did a great job in test fitting the kits and listing it on forums and on his web site, at that time interest was high. To date we have sold a total of 50 kits to our distributor in the USA
and I think last count he still had 40 in stock.
Current sales of this part have not covered time and effort by all put in to complete the part, hence you can see our hesitation to complete the RR Engine mount.

So you see the interested was kind-of high, but not enought make the RR poly engine mount.
I don't think that the bushin' would be that much to get installed or the purchase.
Who all is interested??
Let me know and let's start a list.

I have tried wit the the Torque Rod, and not that much success.
The URD is in the same boat.

Their email reply to me.

We did stop making them. It was a slower mover then we anticipated.

We could do another batch of them, but it would have to be at least 10
units all pre paid. If you wanted to organize it and get 10 prepaid
orders then we would do another run of them.


Gadget
__________________________________________________________________
Underdog Racing Development
www.URDUSA.com

So if we get 10 people wit URD they will start it up again.

Their second reply:

$260 plus $8 shipping for a prepaid order of 10 units.

From the time the complete order is made we are looking at 4-6 weeks to
complete the production and deliver them.


Gadget
__________________________________________________________________
Underdog Racing Development
www.URDUSA.com

So who all is interested in the URD crank pulley??
Make a list also.

You can count me in for the bushings. I would like to get all new super pro bushings under the hood. You know, dog bone, engine mounts and I think there is at least one more, right?

What the heck is a torque rod?

Not sure about a crank pulley. What would that do for my car?

[SleeperSolara]

You can count me in for the bushings. I would like to get all new super pro bushings under the hood. You know, dog bone, engine mounts and I think there is at least one more, right?

What the heck is a torque rod?

Not sure about a crank pulley. What would that do for my car?

Well man.
There are a total of 5 total but 1 is not on sale to public as i said cause of low demand.
Which is the RR poly engine mount, which i want.
I've gotten a total of 3 so far out of the max five and hopefully 1 more so i will have 4 total, and get the 5th one rollin' again.

Torque Rod will help the engine not shift back and forth that much.
It like another Dog bone bushin' but a rod.
Check my cardmain, and look for the torque rod, and you will see where it's located.
The crank pulley from the factory weighs a but load when spinnin', so the URD is lighter.

[krook]

is it hard to change out the crank pulley?

[QuickSEV6]

is it hard to change out the crank pulley?

I wouldn't want to touch it. If you mess it up, you would mess up your timing and that can destroy your engine.

[SleeperSolara]

is it hard to change out the crank pulley?

I wouldn't want to touch it. If you mess it up, you would mess up your timing and that can destroy your engine.

Yeah wit the URD crank pulley, i would suggest gettin' a PRO to do it, cause that way you can't screw up the timin' of the car.
But wit the SuperPro RR engine mount, looks tough to me when i was under the car lookin' for the P/S bushin'.

[QuickSEV6]

But wit the SuperPro RR engine mount, looks tough to me when i was under the car lookin' for the P/S bushin'.

How much would all four of the bushings cost?
What would the fifth cost?

[SleeperSolara]

But wit the SuperPro RR engine mount, looks tough to me when i was under the car lookin' for the P/S bushin'.

How much would all four of the bushings cost?
What would the fifth cost?

I emailed them about it.....
Haven't gotten a reply yet.

[QuickSEV6]

I emailed them about it.....
Haven't gotten a reply yet.

What did you pay for yours?

[SleeperSolara]

I emailed them about it.....
Haven't gotten a reply yet.

What did you pay for yours?

I got my P/S and front control arm rear bushin' from the recent G/B on ToyotaNation.
Thinkin' about gettin' the front bushin' for the front control arm soon.

[sydemoid]

I just got my dog bone, and torque rod yesterday....

im installing them on saturday (next day off), and will post any differences...

As for the pulleys, im interested, so count me in on that, depending on cost of course.

[SleeperSolara]

I just got my dog bone, and torque rod yesterday....

im installing them on saturday (next day off), and will post any differences...

As for the pulleys, im interested, so count me in on that, depending on cost of course.

Oh, ok.
Well if we get more people that price would go down i think.

[SleeperSolara]

**List for SuperPro RR engine mount**

1. SleeperSolara [John]
2. JavaJoe_2


** List for the URD under crank pulley**

1. SleeperSolara [John]

[QuickSEV6]

**List for SuperPro RR engine mount**

1. SleeperSolara [John]
2. JavaJoe_2


** List for the URD under crank pulley**

1. SleeperSolara [John]

Count me in for the RR engine mount