[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Clear Corner Seal up

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

Clear Corner Seal up

Clear Corner Seal up

Postby adam2562 » Wed Jun 04, 2003 8:06 am

when u guys seal up your clear corners... do u just take the sealer and go around the edge again.. or do you heat it up and take it apart and do it over :roll:
Adam - 99 V6 5spd 165k -SOLD
adam2562
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 686
Joined: Wed Nov 27, 2002 10:13 am
Location: North Potomac, Maryland
Top

Postby TadS » Wed Jun 04, 2003 9:04 am

I just went around the edge of the housing, where the seam is visible. No condensation since.
Let's just pretend I didn't grow up, or you're going to be terribly disappointed.
User avatar
TadS
SolaraGuy Supporter
SolaraGuy Supporter
 
Posts: 1447
Joined: Wed Nov 20, 2002 8:05 pm
Location: The Hoosier State
Top

Postby FLASH » Wed Jun 04, 2003 5:51 pm

I took off that black rubber thats already there and sealed the seam and superglued the rubber back on....STILL got a little condensation though.
==FLASH==
99 Solara SE with Many Mods (See outdated website) - Weekend Warrior
2001 Cadillac Deville Daily Driver
(Wife's) 2007 Toyota Camry LE with Basic Mods
(Sister's) 2011 "Pink Prius"
FLASH
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1802
Joined: Sun Jan 26, 2003 4:00 pm
Location: South Jersey
Top

Postby adam2562 » Wed Jun 04, 2003 9:31 pm

thanks for the replies guys... and one more question.. wut stuff did u use to seal it up?
Adam - 99 V6 5spd 165k -SOLD
adam2562
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 686
Joined: Wed Nov 27, 2002 10:13 am
Location: North Potomac, Maryland
Top

Postby Missay » Wed Jun 04, 2003 9:38 pm

Adam2562 wrote:wut stuff did u use to seal it up?


aquarium silicon gel...i figure, it's strong enough to keep water/fish from escaping from a fish tank, it's strong enough to keep water out of cheap plastic :P
Melissa
Missay
SolaraGuy Ambassador
SolaraGuy Ambassador
 
Posts: 2493
Joined: Tue Jun 11, 2002 10:28 pm
Location: Malden, MA
Top

Postby FLASH » Thu Jun 05, 2003 4:52 am

Super Glue works pretty good, too. But Silicone is reccommended. [sp?]
==FLASH==
99 Solara SE with Many Mods (See outdated website) - Weekend Warrior
2001 Cadillac Deville Daily Driver
(Wife's) 2007 Toyota Camry LE with Basic Mods
(Sister's) 2011 "Pink Prius"
FLASH
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1802
Joined: Sun Jan 26, 2003 4:00 pm
Location: South Jersey
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 9 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net cron