Aftermarket license-plate lights????

[CamryOnBronze]

i think mine are pretty similar to the ones posted, Ill see if I can get a pic tonight.

[SolaraBlue]

They're like Lexus HID white. I ran outside for ya.

that looks really good, thank!!!
which ones are those again? the 6led's or 4?


jeff, we dont have a pep-boys around here
and im pretty sure advance auto parts doesnt have them.... atleast, last time i went in they didnt....

another thing,
how the hell do i get into the housing to change the bulbs? i havnt really tried yet, but it doesnt look too easy...

[woa_its_j3ff]

for the housing look where your license plate is. take a flathead screwdriver and there shoudl be 2 notches or grooves. right above where the screws are,(where the light housing is for the license plate bulbs are) one for each bulb (one on each side) stick it in. apply pressure with finger as well and push in and pull out. then simply twist the bulb out. and voila. it took me 1 minute to change mine.

since you dont have pepboys, just order the ones on superbrightleds.com

hope you get that sexy ride of yours even sexier. props that you didnt go with a BLUE led light ..
white looks best imho. good luck!

[SolaraBlue]

thanks again jeff. since i made this post i havnt had to wait more than 5 minutes for a reply from you. haha you must have a computer attached to your hip.

either way, ill hunt around town today... if i cant find them ill buy online.

[woa_its_j3ff]

I'm in the computer lab at school. waiting for my next class. i just surf here since there's nowhere else to be on right now .

[CamryOnBronze]

it also tells you how to replace them in your owner's manual

[SolaraBlue]

it also tells you how to replace them in your owner's manual

i dont have one....

[CamryOnBronze]

im just messin with ya ill get a pic of mine when the monsoon stops...

[SolaraGuy22]

I have the 6 not the 4, check the post on page 1.

*Also you don't need a screwdriver just reach down and pull the tab.

[Jai_Jai_Binks]

This dude from bahrain (at tn) used the housing from a GS300 on his avalon to actually have a lexus lic/plate lights, it looks great...I priced it about 2 years ago, was close to 35 bucks...might want to check that out too...

[kingkakyle]

so solaraguy u got the t13 x6 rather than the wledx6
is there a differernce?

[PXLpainter]

LOL! This thread just reminded me that I bought some hyper-white LEDs about 6 months ago and forgot to even put them in!

Better go do that while its still fresh in my stale mind!

[krawzyazn]

I got some nice ones lol there is only 1 LED on it and its BRIGHT!! I'll get some shots when it gets dark out

[NeFaRiOuS_SLE]

yeah mine are pretty much like that but they dont lihgt up my bumper area. just the license plate.
(but i bet it only shows that cuz of the pic. not real life)

honestly Blue, just go to Pepboys and buy those White 194 LEd bulbs u see on display. my friend did that for his camry and they look really good too. or get the ones that i pointed out for you. you can't go wrong either way.

That's what I have... I'll post pics tomorrow (I'm letting a homie borrow my laptop and I left the USB cable in it ). However, the only downside for the PepBoys LED is that although there's enough light output to not get you pulled over, it's not remotely close to the brightness of the "new Lexus" look that I was trying to achieve at the time, so your best bet is to actually get the ones with multiple LEDs instead of the cheap single LED.

[SolaraGuy22]

so solaraguy u got the t13 x6 rather than the wledx6
is there a differernce?

The wledx6 is probably more bright than the t13 x6. The reason I bought that style was because I already had the t13 x9 and it was just a little too bright for what I was looking for. So with that in mind I knew the color and design worked I just need 3 less in each one.

The wledx6 is $1.00 or so more expensive per bulb so I'm sure it's just as bright as the 9.

Hope that helps.