Special Photoshop demand

by **SleeperSolara** » Mon Nov 19, 2007 11:58 pm

Would looks very nice on your car man.

by **---CAMRAZY---** » Tue Nov 20, 2007 4:45 pm

If you buy these new be prepared to pay a pretty penny for them, Also the lip depends on the Offset and disk.

Hope you find them used...... even used may be expensive.... lol

by **Sebas007** » Tue Nov 20, 2007 4:57 pm

---CAMRAZY--- wrote:If you buy these new be prepared to pay a pretty penny for them, Also the lip depends on the Offset and disk.

Hope you find them used...... even used may be expensive.... lol

I knew the price of those wheels since I wanted them...640 USD/each
They are discontinued...but in Europe they seems to sell them under the Work Euroline series. If I want them hard I will have to import them from Europe...they are pretty expensive there 700-800 Euros/each !!! I was ready for 640 USD...not for 750 Euros ! Let see....why they have to discontinued their most good looking rim ?? :-?

Before seeing those WORK TS1 Reloaded I saw the Zenetti Five...looking a bit the same...well :-?

I'm really dissapointed !!

by **---CAMRAZY---** » Tue Nov 20, 2007 5:44 pm

Yeah, I just got a set of Brand New Work Wheels last week, and MSRP on those are about 800 each, then you got to include tax, shipping and then decide what new tires you are going to buy.......

So start saving your canadian moneys!!!

by **Sebas007** » Tue Nov 20, 2007 5:52 pm

Are you aware that CAD >= USD ?
Still have to save them though !

by **---CAMRAZY---** » Tue Nov 20, 2007 6:09 pm

Sebas007 wrote:Are you aware that CAD >= USD ?
Still have to save them though !

Yes, but not by much... LOL

by **Sebas007** » Tue Nov 20, 2007 6:10 pm

---CAMRAZY--- wrote:
Sebas007 wrote:Are you aware that CAD >= USD ?
Still have to save them though !

Yes, but not by much... LOL

rigth ! at least it isn't 0.65 USD = 1 CAD

by **bri_n_m** » Tue Nov 20, 2007 10:26 pm

if you really get desperate i saw a bunch of them in 18 on yahoo japan. i didnt search 19's but they had at least 5+ sets in 18. Also that guy that posted those rims in the link i put from the rsx forums sells a lot of rims from yahoo japan. pm him and maybe he can source you a set.

by **Vi3tT3kNiqz** » Wed Nov 21, 2007 2:37 am

man i didnt even know that US dollar fell that much. I think its time we move elsewhere.

PS: sorry to thread jack

by **Sebas007** » Tue Nov 27, 2007 9:05 am

Like some know I want to buy some other wheels with fat lips (as possible). So I want to go with a 19X8.5" w/ +45mm offset...I could go with a safe choice 19X8 +40mm offset like I have now but the 8.5" would be really better.

Found a contact in US who is direct with Work in Japan...he asks Work Japan and they still can make it !!

2900 USD + shipping !!

It is a bit over I initially thought... I want 8.5" width wheel so bad !! I want to keep 40 sidewall series tires in 19"

I know that Ludwig has 8.5" with +42mm offset but had to go with 35 sidewall series tire...wonder if 8.5" +45mm would rub in the inside...on suspension components because it is 11m more towards suspension components ?? I know the outside would be good since 8.5" w/ +45mm is 1mm more outside 8" w/ +40mm offset...anybody could help me on this one PLEASE !?! I need to be sure before buying 3000$ wheels !!!

Following, the emails from the Work contact guy.

Me
Him

Are we still talking of Work TS1 RELOADED not T1S ??
Also I want you to confirm me in the silver if this spec still available and the price

19X8.5 +45 offset 5X114.3mm bolt pattern
or
19X8 +38mm or +40mm offset 5X114.3mm bolt pattern

Yes we are talking about Termist. can do them in silver with your spec they will take about 5 weeks to build and the cost will be $2,900 U.S.plus freight.

Nice !! But when you say "Can do them"...I thought the Termist series was discontinued refering to Work USA and work Japan website. then if they still made...I would prefer polished over silver. May you provide me a pic with the different color please.

I am direct with WORK so I asked them if they had any parts left after they discontinued, there response was yes they had limited parts and could build the sizes you requested and they could paint silver or black if you like. No polished is available and the color of the silver would be CS.

by **behrozec34** » Tue Nov 27, 2007 4:32 pm

would be hugely appreciated if i could see these:

http://www.forum-auto.com/uploads/200506/bullit95_1119289866_mean6gunmetal.jpg

on a silver gen2 sport v6. [/url]

by **PXLpainter** » Wed Nov 28, 2007 4:17 pm

Sebas - those look sick! Almost as good as what Milt put on Posh's ride!

What are they gonna run you? And are you getting painted or polished?

by **CosmicGrooves** » Wed Nov 28, 2007 11:18 pm

Sebas007 wrote:My own try ! hahaha No skillz !!

HAHAAH!!! That's actually pretty good!

by **CosmicGrooves** » Wed Nov 28, 2007 11:19 pm

Solarizona wrote:Looks pretty sick to me!

HAHAHAHAAAAAAAAAA

by **CosmicGrooves** » Wed Nov 28, 2007 11:21 pm

OH, back on topic... I think those wheels would look freaking NICE!

Special Photoshop demand

yay my turn

Who is online