FS: Craigslist Find: 1mzfe Supercharger 750obo!!!!!!

[Toy1mzfe]

i got a trd supercharger for sale. only the SC. It will work for the camry, es300, solara, sienna, and avalon. all which uses the 1mz-fe engine. since its not the complete supercharger set..the SC spins without any slop or irregular resistance. comes with stock 4psi pulley. Ill include some of the fittings that the real trd sc kit comes with and can point out which fittings you'll also need that can easily buy from auto parts store. the only thing you'll need to source is the supercharger plate and the TRD EBC. will also provide copy of wiring diagram and trd sc install guige. ill let this go for pretty cheap.. retail for the whole supercharger kit is roughly $3000 when it was available. this kit had been discontinued for years. if you want to squeeze more power out of your 1mz then this is a great start.

Im going to let this go for 750 obo. If i have to ship it .. then buyer must cover the shipping cost.

link: http://sfbay.craigslist.org/sfc/pts/487734467.html

email: sale-487734467@craigslist.org


Alight so i found this on craigslist in San Francisco. I would hop on this, but im having some issues. So, one SG helping another Sg, here is the deal. Hes willing to ship, so Go on and hope on this

this is not my supercharger

[99V6solaraSE]

damn i want it!!! but where the hell would i find the EBC or the plate???
This is the 2nd one ive come across but imcomplete and those parts are damn near impossible to find

how hard would it be to fabricate these parts?

[happy_aggies]

You don't really need EBC. It just disable boost after red-line (and perhaps cut boost on 1st gear for automatic => this discussion has been go back n forth)

[Ruski]

only 750$

[99V6solaraSE]

where could i get the plate from? im pretty sure i need that part.

[Ruski]

i highly doubt you can find the plate

[99V6solaraSE]

bleh.. then there would be really no way i could put this thing on if i bought it.

[CamryOnBronze]

you could always buy it and flip it on ebay...

I have the idler assembly for the Sienna... the only difference is that the top most pulley on the idler assembly is mounted higher than on the solara/camry one. If you wanted to, you could probably drill a new hole and lower the top pulley about a half inch. that would give you enough clearance to get the hood shut and you should be home free. The car ran fine with the sienna assembly, i just couldnt close the hood by about a quarter inch...

something to think about...

[unbalancedwood]

DANG!

[checking banks for a loan]

[SleeperSolara]

Dang.
I think i would want pictures though.....

[99V6solaraSE]

Lol he emailed me back.. he has no EGR either...

[Ruski]

Dang.
I think i would want pictures though.....

Heres pics: the first pic i see is so familiar wit hte two S/c on a oil box.. (its the Bottom one )
http://smg.photobucket.com/albums/v461/ ... oto-11.jpg

[SdeA]

DOnt know if you guys notice but that supercharger is from Hybrid2 he is one of the member on here...

http://www.solaraguy.org/viewtopic.php? ... ht=#415261

Here is a picture of it in one of his post.

[CamryOnBronze]

aha, good catch...

[99V6solaraSE]

you could always buy it and flip it on ebay...

I have the idler assembly for the Sienna... the only difference is that the top most pulley on the idler assembly is mounted higher than on the solara/camry one. If you wanted to, you could probably drill a new hole and lower the top pulley about a half inch. that would give you enough clearance to get the hood shut and you should be home free. The car ran fine with the sienna assembly, i just couldnt close the hood by about a quarter inch...

something to think about...

how hard would that be?