[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Getting through the firewall?
Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.

Getting through the firewall?

Getting through the firewall?

Postby 99V6solaraSE » Sat Mar 22, 2008 9:17 pm

I need to get boost line from my trd gauge to the boost port on the sc, preferrably the driver side.
Where does rubber gromet on the drivers side lead to? I tried sticking a wire hanger, and a rubber hose to see where it led to but so far i couldnt find anything. Ive looked under where the pedals were and couldnt figure out where to go.
Blown @ 5.5PSI w/ xerd, 3inch jpp, tunable cpe Automatic... SOLD
2010 Mazdaspeed 3 ZOOM-ZOOM B)
User avatar
99V6solaraSE
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1016
Joined: Tue Jul 06, 2004 6:31 am
Location: Jacksonville/Gainesville

Postby Jakecallun20 » Sat Mar 22, 2008 9:53 pm

I had to search around too, nothing (that I could see). I ran it behind glove box on pass. side. :(
02' AV6 Accord Coupe- Daily
86' Mercedes 560SL- Project
99' Solara SLE V6- Sold 09/19/09 :(
Image
User avatar
Jakecallun20
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1604
Joined: Fri Jun 29, 2007 8:24 pm
Location: Austin, Texas

Postby 99V6solaraSE » Sun Mar 23, 2008 7:53 pm

anybody got any pics of how they got their boost line or anything for that matter, through from the drivers side?
Blown @ 5.5PSI w/ xerd, 3inch jpp, tunable cpe Automatic... SOLD
2010 Mazdaspeed 3 ZOOM-ZOOM B)
User avatar
99V6solaraSE
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1016
Joined: Tue Jul 06, 2004 6:31 am
Location: Jacksonville/Gainesville

Postby 99V6solaraSE » Mon Mar 24, 2008 4:39 pm

well i finally found a way .. what a bitch it was too.
Found an opening that goes into the fender then through to the rubber gromet where the pedals are.
Blown @ 5.5PSI w/ xerd, 3inch jpp, tunable cpe Automatic... SOLD
2010 Mazdaspeed 3 ZOOM-ZOOM B)
User avatar
99V6solaraSE
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1016
Joined: Tue Jul 06, 2004 6:31 am
Location: Jacksonville/Gainesville

Postby CamryOnBronze » Mon Mar 24, 2008 4:55 pm

I ran my boost line on the passenger side in the fenderwell- there is a rubber grommet from the left (passenger) side of the engine bay to the fenderwell, then the fenderwell to behind the dash.
Image
94 Camry: Beater
99 Solara: S/C & Totaled (RIP)
93 240SX: SR20DET
User avatar
CamryOnBronze
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 3337
Joined: Fri Jan 05, 2007 6:14 pm

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 4 guests