[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - SUPERCHARGER INSTALL

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

SUPERCHARGER INSTALL

Postby GNAW » Wed Jul 23, 2003 3:32 am

i went to the one in palo alto, they did a pretty good job plus they have a specialist that does just the chargers..
GNAW
 
Top

Postby Mole » Wed Jul 23, 2003 10:27 am

just a rule of thumb, let the S/C break in.

boost builds and is not instantaneous. you will have to let it wind out in 2nd gear for us autos. getting a Y pipe will help decrease backpressure. getting an aftrmrkt air filter will also help decrease resistance. and of course an a/f controller

these are some of the things you need to consider to help the car breathe better when driving it harder than normal.

the boost gauge and a/f ratio reader (complete uselessness if from autometer imho) are very easy to install.
the power of 8
User avatar
Mole
molerator
molerator
 
Posts: 1677882
Joined: Sun Apr 20, 2003 12:25 pm
Location: Glendale, Ca
Top

Postby xXsolaraXx » Wed Jul 23, 2003 11:37 am

gnaw, sorry, the only accurate way to know is buy pluggin in ur boost gauge...if you go back to the dealership they should be able to plug in a boost gauge from like a tundra or something and tell u what you are reading...also the whining noise will happen even if you are getting 0 psi...so thats not a good way to tell...get that checked asap or else your installer will try to make up some bs...L8r, moe
Image
xXsolaraXx
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 804
Joined: Mon Jan 27, 2003 12:18 pm
Location: Euless, TX
Top

Postby GNAW » Fri Jul 25, 2003 3:27 am

THANKX GUYS...

I was wondering for those of you who have the autometer boost and airfuel gauges and didnt install them yourself how much did you get charged to the install, was it difficult ?

Do you think a newb at wiring like me could do the job, if so any tips or hints....

THANKX AGAIN..
GNAW
 
Top
Previous
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: Google [Bot] and 45 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net