[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - S-afc II

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

S-afc II

S-afc II

Postby SC V6 » Sun Aug 03, 2003 10:54 am

I have a S-afc II.. and it has an extra wire for the knock sensors.. now does anyone know which wires from the ECU are the sensors? like, the first bank knock sensor, and the second one? thanks
Scott
SC V6
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4900
Joined: Tue Jul 02, 2002 3:26 pm
Top

Postby Fletch » Mon Aug 04, 2003 4:55 am

I haven't actually looked at the ECU, but the wires should be braided. I don't have a Haynes manual or a toyota service manual. I would really like to know which is 1 and 2 also. Maybe someone with a service manual could help us out.

Also, is 1 the front bank and 2 the aft bank?
2006 Legacy GT spec.B

(Totaled) '99 SE V6, TRD S/C, 5.5 psi Pulley, Jim's Fuel Upgrade, TRD Shortshifter, SPEC Stage 3 Clutch, Lightweight Flywheel, Tokico / Eibach, TRD RSB, 2.5" Custom Y-Pipe, Greddy Cat-Back
Fletch
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 693
Joined: Wed May 14, 2003 1:03 pm
Location: South Bend, Indiana
Top

Postby Fletch » Mon Aug 04, 2003 6:15 am

I heard of someone basically disconnecting the aft bank knock sensor from the ECU and running the front bank knock sensor to both inputs. Supposedly, since the front bank is farther from the supercharger it is less likely to pick up noise and or vibration from the supercharger and therefore it won't retard the timing as much as the aft bank sensor.
2006 Legacy GT spec.B

(Totaled) '99 SE V6, TRD S/C, 5.5 psi Pulley, Jim's Fuel Upgrade, TRD Shortshifter, SPEC Stage 3 Clutch, Lightweight Flywheel, Tokico / Eibach, TRD RSB, 2.5" Custom Y-Pipe, Greddy Cat-Back
Fletch
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 693
Joined: Wed May 14, 2003 1:03 pm
Location: South Bend, Indiana
Top

Postby SC V6 » Mon Aug 04, 2003 8:03 am

hmm.. ill look in my chiltons.. but I bet I won't find it.. but if someone else knew.. that would be even better.. thanks
Scott
SC V6
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4900
Joined: Tue Jul 02, 2002 3:26 pm
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net