Please post pics of your engine bays showing grounding kits.

[Solorange]

Kevin TMMKToy asked me to post this for you guys so he can have some ideas by the time he gets home from work so he can do this to his car tonight. He is interested in the 1MZFE engine bays. Thanks Chris

[ASG14]

I've never even seen a grounding kit on any 1MZ.....

[Dawgz]

Kevin TMMKToy asked me to post this for you guys so he can have some ideas by the time he gets home from work so he can do this to his car tonight. He is interested in the 1MZFE engine bays. Thanks Chris

[CamryOnBronze]

he wants to see grounding kits on a 1mz... it isnt that hard to understand bro funny gif though

[Dawgz]

I've never even seen a grounding kit on any 1MZ.....

I believe silverlicious has a grounding kit....

[Mr_Chunkz]

HKS Circle Earth Grouding System?



purple wires.

[lilm]

just replace the stock ons with a lower gauge

[Chinky420]

i have grounding wires, but no pics (also @ work)

but from memory i have them daisy chained as follows:

neg terminal --> chassis

(from chassis i have)

-->chassis --> stock ground point (near transmission bell) --> engine ground point (between the front bank and rear bank, drivers side).

-->chassis --> throttle body --> far side of intake plenum (pass side) --> passenger side stock ground point

-->chassis to engine block (middle-ish bolt, same as tracy's)

the chassis point has multiple terminal rings stacked upon each other (if you couldn't figure it out from the way i wrote it). i used 4AWG wiring, and gold terminals from knukonceptz.com, and made my own (hence no negative grounding plate, as in tracy's setup, where all the wires hook into the neg term).

[SleeperSolara]

I just replaced all the OEM wires wit thicker AWG wires.
I'm thinkin' about uppin' the AWG thickness soon.
For my negative ground i have a 0 AWG from the tranny housin' to post clamp.
The other wire from under the battery tray is a 4 AWG wire.

[Midias]