spintech muffler

by **Matt_solara99** » Sun Oct 26, 2008 11:16 am

just got it installed yesterday

by **Midias** » Sun Oct 26, 2008 11:52 am

Sounds Good

by **Pogs** » Sun Oct 26, 2008 3:23 pm

does sound good... that a i4 or a v6

by **Matt_solara99** » Sun Oct 26, 2008 4:39 pm

its a v6...the guy at the muffler shop where i got it installed told me that spintechs sound good with small engines.. dude needs to respect the 3.0 liter
:drinking:

by **SolaraGuy22** » Sun Oct 26, 2008 4:59 pm

Very nice

by **PXLpainter** » Sun Oct 26, 2008 5:02 pm

Matt_solara99 wrote:its a v6...the guy at the muffler shop where i got it installed told me that spintechs sound good with small engines.. dude needs to respect the 3.0 liter

LOL!

Well - compared to a biggass V8, I guess it would be considered "small", but still... it sounds good though! :up:

by **Akfahad** » Sun Oct 26, 2008 7:38 pm

that does sound good....

by **Jakecallun20** » Sun Oct 26, 2008 9:14 pm

Sounds nice, I'd love to have one on my 3.0. A couple of questions though,

Where'd you get it?
How much was it?
And was it a catback or just axleback?

-Jake

by **Matt_solara99** » Tue Oct 28, 2008 5:10 pm

here is the website

http://spintechmufflers.com/spintech/spintechindex.asp

I got it for my 18th birthday so I dont know where exactly or how much my dad paid. And its universal muffler soI got it installed by a muffler shop here in Houston.The inlet on the stock pipe is 2.25 and the muffler inlet was closer to 2.5....so it could be a problem if you want to install yourself but a decent muffler shop can do it. The stock muffler was cut off so you can't go back to stock. The sharp bend on the stock muffler inlet is eliminated and the flow is probably better than stock. The spintech is made from what looks like 16 gauge steel so the new hangers are welded directly to the muffler body. THe muffler guy asked if I wanted the muffler painted and I would recommend this as it's ugly as hell.

by **akora12** » Tue Oct 28, 2008 5:24 pm

Sounds good. Did you reuse the OEM tip or something else?

by **Matt_solara99** » Tue Oct 28, 2008 5:32 pm

I was trying to keep the stock look. But a 2.25" Tip attached to a 2.5" outlet would restrict the flow. The shop had something similar the tip is a 3" all stainless

by **Biggi_e** » Tue Oct 28, 2008 5:47 pm

looks and sounds good. im sure it'll break in a few days maybe get little deeper

by **GzNutz** » Wed Oct 29, 2008 7:31 am

Sounds nice!

by **Midias** » Wed Oct 29, 2008 7:46 am

Matt_solara99 wrote:here is the website

http://spintechmufflers.com/spintech/spintechindex.asp

I got it for my 18th birthday so I dont know where exactly or how much my dad paid. And its universal muffler soI got it installed by a muffler shop here in Houston.The inlet on the stock pipe is 2.25 and the muffler inlet was closer to 2.5....so it could be a problem if you want to install yourself but a decent muffler shop can do it. The stock muffler was cut off so you can't go back to stock. The sharp bend on the stock muffler inlet is eliminated and the flow is probably better than stock. The spintech is made from what looks like 16 gauge steel so the new hangers are welded directly to the muffler body. THe muffler guy asked if I wanted the muffler painted and I would recommend this as it's ugly as hell.

If you don't like the paint color I would suggest repainting it with high temp silver it looks really good and I doubt most people will notice. I used it on the collector for my V45 Magna.

by **lilm** » Sun Nov 09, 2008 12:16 am

drove this car today......after we put a short ram on.....the sound is AMAZING. Its a nice deep tone at idle but if you floor it....it absolutely screams

spintech muffler

spintech muffler

Who is online