Pics of my greddy evo, mid pipe does not fit!?

by **krzyray** » Sat Sep 27, 2003 8:21 am

You can't see the length difference from this angle.

I did not move these from the orginal pic. Here is the length difference I am talking about, seems to be a foot shorter. Also, the hanger on here no way fits the original hanger position.

The other bolt will not go through because the hole does not match up. The width of new mid pipe seems to be 1 inch smaller than the stock one.

Close up showing the holes of each end of mid pipe don't match up.

So did I receive the wrong model exhaust?! I purchased from Import Replacement Parts http://www.groupbuycenter.com/buy.aspx?id=12246

by **AzN_DrAgoN48** » Sat Sep 27, 2003 8:23 am

it says on the website the evo is for the v6. i don't know if the i4 and v6 have the same system

by **krzyray** » Sat Sep 27, 2003 8:35 am

AzN_DrAgoN48 wrote:it says on the website the evo is for the v6. i don't know if the i4 and v6 have the same system

Yeah I saw that too but on this thread http://www.zer0.info/solaraguy/viewtopic.php?t=2338&highlight=greddy

Eddiman wrote:
which exhaust can i use on the 2002 4cyl solara? Cuase isnt the Greddy for the v6?

Flipside: You can use any of the V6 catbacks...they all bolt on with no problem.

by **i20solara02i** » Sat Sep 27, 2003 11:26 am

i have the greddy evo on my 02 i4. i think they send you the wrong evo cuz it doesn't look like that. their only 1 hanger toward the tip of the exhaust and that one has 2 so you might want to go return it. and get the right one.

richard

by **Mole** » Sat Sep 27, 2003 12:33 pm

yeah, it looks like the incorrect model. the bend towards the muffler looks off. sorry you had to go through this... maybe they will let you keep it and send you the correct one.

by **krzyray** » Sun Sep 28, 2003 8:57 am

man this sucks... damn Import Replacement Parts, anybody order from them before? It took me a few hours trying to take the exhaust off and trying to put the new one on. Now I'm going to have to put old one back one :evil:

by **onefiend** » Sun Sep 28, 2003 9:14 am

You should have just went to a Muffler Shop and have them custom bend you some piping. Sux you had to go through all this.

by **krzyray** » Sun Sep 28, 2003 9:00 pm

On the Greddy box itself it has a label that says part number:
10116600 Solara/Camry 6 Cyl. This is the correct part number as shown on Greddy's web site http://www.greddy.com/products/Exhaust.htm#evo

So I guess the box was packed wrong then?

by **Mole** » Sun Sep 28, 2003 11:45 pm

most likely so.

by **krzyray** » Mon Sep 29, 2003 2:43 pm

Greddy is saying that the piping is different on the 02 Solara vs the 99-01. They are lying right?

Just want to make sure, has anybody installed the Greddy Evo on an 02 Solara?

Thanks!

by **Hsakuragi** » Mon Sep 29, 2003 4:47 pm

that engine is different for 4 banger, that's why? for 6 , it does fit.

rufus129 has 4 banger with evo

by **Mole** » Mon Sep 29, 2003 4:50 pm

1st and 1.5 gen solaras have interchangable parts.

an exhaust specifically made for the v6 will fit the I4.

by **i20solara02i** » Mon Sep 29, 2003 8:35 pm

hsakuragi wrote:that engine is different for 4 banger, that's why? for 6 , it does fit.

rufus129 has 4 banger with evo

ya i have the greddy evo on my 02 solara 5spd =p

richard

by **Mole** » Tue Sep 30, 2003 2:43 am

rufus129 wrote:
hsakuragi wrote:that engine is different for 4 banger, that's why? for 6 , it does fit.

rufus129 has 4 banger with evo

ya i have the greddy evo on my 02 solara 5spd =p

richard

since when did you go 5spd?

by **Jackass-Jeff** » Tue Sep 30, 2003 9:25 am

TRDMole177 wrote:
rufus129 wrote:
hsakuragi wrote:that engine is different for 4 banger, that's why? for 6 , it does fit.

rufus129 has 4 banger with evo

ya i have the greddy evo on my 02 solara 5spd =p

richard

since when did you go 5spd?

In progess ... *sshhhhhhhhh* we don't want other people doing it too... :wink:

ahahahahahahahahaha!

Pics of my greddy evo, mid pipe does not fit!?

Pics of my greddy evo, mid pipe does not fit!?

Who is online