[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Over-Boring

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

Over-Boring

Over-Boring

Postby B_Master_Flash » Wed Nov 05, 2003 9:27 am

Does anyone have their engine over-bored? I was told that over-boring would lower the engine compression and allow a compresser to run at higher psi and make more HP. I'm assuming no one has their engine stroked b/c no one makes a crank for our car, but I guess I'll ask anyway... Anyone? Over-bored or stroked?
Nascar would be a sport if half the cars were driving the other direction.
B_Master_Flash
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 334
Joined: Mon Jul 07, 2003 12:48 pm
Location: Sacramento, CA
Top

Postby Yanks0114 » Wed Nov 05, 2003 9:29 am

Jim@FA was making different heads for our car which lowered compression ratio into the 9s:1. Jim has them, Cdssolara has them, scottv6, EricSol and a few other guys all have them.

Thats another solution to running higher boost
Yanks0114
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 4756
Joined: Sat Aug 24, 2002 12:01 am
Top

Postby adam2562 » Mon Nov 10, 2003 8:53 pm

i have another i got that need rod bearign soi'm goign to eiter find or have custom forged pistons ut in ad porta nd polish y heads and intake manifold and stroke it to a 3.2... my mechanc has hookups so i'm letting him doing it.. and then i'm gonna order a LSD and we're rebuilding my tranny .. nothing is wrong with the tranny but figure i should since i'm at 130k
Adam - 99 V6 5spd 165k -SOLD
adam2562
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 686
Joined: Wed Nov 27, 2002 10:13 am
Location: North Potomac, Maryland
Top

Postby Guest » Wed Nov 12, 2003 8:10 am

Adam2562 wrote:i have another i got that need rod bearign soi'm goign to eiter find or have custom forged pistons ut in ad porta nd polish y heads and intake manifold and stroke it to a 3.2... my mechanc has hookups so i'm letting him doing it.. and then i'm gonna order a LSD and we're rebuilding my tranny .. nothing is wrong with the tranny but figure i should since i'm at 130k


Let us know how that goes
Guest
 
Top

Postby adam2562 » Thu Nov 13, 2003 8:16 am

i sure will.. but i just found out it'll be awhile before it starts due to money :(
Adam - 99 V6 5spd 165k -SOLD
adam2562
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 686
Joined: Wed Nov 27, 2002 10:13 am
Location: North Potomac, Maryland
Top
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 5 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net cron