[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Just replaced the O2 sensor
Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.

Just replaced the O2 sensor

Just replaced the O2 sensor

Postby impactX » Thu Feb 19, 2004 5:53 am

After driving with code 0135 for 3 months, I've finally fixed it since I shipped my rims to get repaired and repainted and the car is still on jackstand.

Anyways, V6 has 3 sensors, it was such a bitch to replace the one on the back manifold. I don't know how Toyota did it, I swear they have midgets to replace that part.
impactX
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 958
Joined: Thu Nov 21, 2002 9:06 pm

Postby bkp_duke » Thu Feb 19, 2004 10:41 am

think that one is bad, just be glad it wasn't the one behind the CAT, you have to take the seats out to get to it
bkp_duke
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 397
Joined: Thu Apr 24, 2003 5:53 am
Location: Dallas, TX

Postby TRD_solaRa » Thu Feb 19, 2004 5:52 pm

bkp_duke wrote:think that one is bad, just be glad it wasn't the one behind the CAT, you have to take the seats out to get to it


damn iz that where the other O2 censor is?<big>?</big>? that is shytty dealz man . . . wutt if I wanted to get rid of the CAT all together. I wanted to get a full piping from the headers to my exhausts. Can I do that or wutt?
TRD_solaRa
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 703
Joined: Sun Feb 01, 2004 3:15 pm
Location: Northridge, CA & HI State

Postby impactX » Thu Feb 19, 2004 6:45 pm

bkp_duke wrote:think that one is bad, just be glad it wasn't the one behind the CAT, you have to take the seats out to get to it


Actually, I've already taken the seat out more than 5 times, keep switching between the racing seat and stock seat.
impactX
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 958
Joined: Thu Nov 21, 2002 9:06 pm

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 19 guests