[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Making Moon Roof operable when the car is off?

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

Making Moon Roof operable when the car is off?

Making Moon Roof operable when the car is off?

Postby pythonjosh » Sat Apr 03, 2004 2:59 pm

It seems the Moon Roof is connected to a 'Hot when on (ACC)' wire.
Does anybody know how where connect it to an always hot wire?
Thanks,
Josh
Brilliant Silver 03 Nissan G35 6MT

In the struggle for justice, I is prepared to lay my life on the line. Just like Martin Luther Vandross did.
User avatar
pythonjosh
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1860
Joined: Mon Sep 01, 2003 5:53 pm
Location: Torrance, CA
Top

Postby Mudd » Sat Apr 03, 2004 6:10 pm

It's obviously going to be where the switch is. Pull that down and get in there with a mulitmeter, see what's what. Then run a constant wire from wherever.

I have mine operational with my alarm with a DEI window module. Not that difficult at all, especially when you figure out what wires do what.
Mudd
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 161
Joined: Wed Dec 03, 2003 9:34 pm
Location: Tucson, AZ
Top

Postby pythonjosh » Sat Apr 03, 2004 10:55 pm

what voltage / wattage do I need for the new wire? And going another
way, where can I find where it's power comes from (ie under the dash, the ECU, etc) and cut and splice it with an always hot wire? That way I
won't have to figure out how to run a wire under the ceiling carpet up
to the head console. Thanks,
Josh
Brilliant Silver 03 Nissan G35 6MT

In the struggle for justice, I is prepared to lay my life on the line. Just like Martin Luther Vandross did.
User avatar
pythonjosh
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1860
Joined: Mon Sep 01, 2003 5:53 pm
Location: Torrance, CA
Top
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 17 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net cron