*Update Pics - Whiteline FSB, Brakes, etc...
Okay - not a lot of pics to post just yet, but thought I'd get a couple up at least...
First a shot with the Whiteline Front Sway Bar installed. Notice the red bar on the left side of the pic - that's it. Replaces the big OEM "hook" that comes way up and over the steering shaft that acts like a big spring. This pretty much takes all the flex out of the equation and it now rides like a rigid frame.
Notice I also have the R1 rotors and Stoptech SS lines on now. Once I get Teins I'll be all done with the suspension.
Here's a shot of the rear - with the TRD RSB, rotors and SS lines:
Finally - a shot after the install... the ride height in front rose about 3/8" after installing the Whiteline. The Tein COs will help me drop that back down a bit - just gotta save up a little scratch for those later.
Oh yeah - those are my new grilles too - just simply painted for now, but I'll get them powder-coated eventually. I gave up on my "frankengrille" project using the OEM plastic grille.
I also tore-out all the plastic guard crap that was rubbing and falling-off around the front and in the front wells. I sprayed rubberized undercoating all over up in there so nothing's really exposed. Not like I drive in much snow or anything anyway.
I'll post more pics from underneath when I can - possibly as we get some Header/Y-pipe shots at JP.
First a shot with the Whiteline Front Sway Bar installed. Notice the red bar on the left side of the pic - that's it. Replaces the big OEM "hook" that comes way up and over the steering shaft that acts like a big spring. This pretty much takes all the flex out of the equation and it now rides like a rigid frame.


Notice I also have the R1 rotors and Stoptech SS lines on now. Once I get Teins I'll be all done with the suspension.
Here's a shot of the rear - with the TRD RSB, rotors and SS lines:

Finally - a shot after the install... the ride height in front rose about 3/8" after installing the Whiteline. The Tein COs will help me drop that back down a bit - just gotta save up a little scratch for those later.
Oh yeah - those are my new grilles too - just simply painted for now, but I'll get them powder-coated eventually. I gave up on my "frankengrille" project using the OEM plastic grille.
I also tore-out all the plastic guard crap that was rubbing and falling-off around the front and in the front wells. I sprayed rubberized undercoating all over up in there so nothing's really exposed. Not like I drive in much snow or anything anyway.
I'll post more pics from underneath when I can - possibly as we get some Header/Y-pipe shots at JP.

Last edited by PXLpainter on Sun Apr 15, 2007 12:25 pm, edited 1 time in total.
Old CarDomain pages here: http://www.cardomain.com/ride/2247283
So-long to my 2006 SLE Convertible...

So-long to my 2006 SLE Convertible...

-
PXLpainter - Mod Alumni
- Posts: 6442
- Joined: Tue Jan 31, 2006 8:31 pm
- Location: Ojai, CA